Based on the 1-D & 2-D combined computational model, numerical optimizing analyses on the performance of the orifice type pulse tube refrigerator (OPTR) and double-inlet type pulse tube refrigerator (DPTR) were ca...
详细信息
Based on the 1-D & 2-D combined computational model, numerical optimizing analyses on the performance of the orifice type pulse tube refrigerator (OPTR) and double-inlet type pulse tube refrigerator (DPTR) were carried out. The evolvements process of the flow field in the OPTR and DPTR were examined. The results show that in the compressor expansion process the gas separation phenomenon occurs in the pulse tube, and in the compression process, there exists the gas aggregation phenomenon. The gas velocities in the separation and aggregation interfaces are zero, so the interface is called zero interface. In a period, the zero interface will move from one end of the pulse tube to the other end, which is called zero interface effect. The zero interface effect is an important factor for the performance enhancement of the PTR. The longer the time of the zero interface effect existing in a period, the better the PTR performance. Then based on the simulation results, the mechanism analysis for the existing of zero interface effect was performed. The results show that the introduction of the orifice valve leads to the formation of zero interface effect and the introduction of the double-inlet valve could augment the zero interface effect. For the OPTR, the time of the zero interface existing is about 1/6 period and for the DPTR the existing time of the zero interface is about 1/2 period.
Large fraction of the low-pressure turbine cascade boundary layer is laminar flow due to low Reynolds number. High-lift low-pressure turbine blade leads to increase the adverse pressure gradient at rear of the turbine...
详细信息
Low-pressure premixed laminar flames of 1,3-butadiene/oxygen /argon and 1,3-butadiene+acetylene/oxygen/argon have been investigated with tunable synchrotron photoionization and molecular beam mass spectrometry. Flame ...
详细信息
Laminar flame speeds of hydrogen blended n-butane flames at atmospheric pressure and room temperature was measured in a combustion vessel with Schlieren photography, and determined using nonlinear regression analysis....
详细信息
ISBN:
(纸本)9781615676682
Laminar flame speeds of hydrogen blended n-butane flames at atmospheric pressure and room temperature was measured in a combustion vessel with Schlieren photography, and determined using nonlinear regression analysis. According to the hydrogen addition parameter (RH) and effective equivalence ratio (φF) defined by Yu et al (1986), laminar flame speeds (Suo) for φF between 0.6 and 1.4 were found to increase linearly with RH from 0 to 0.5, with the slope of the variation assuming a minimum around stoichiometry. These experimental results correlate well with computed laminar flame speeds using the detailed reaction mechanism, USC Mech II. Furthermore, the adiabatic flame temperature was found to also increase monotonously with RH at specific φF, with the extent of the increase being the smallest around stoichiometry. It is therefore suggested that the effect of hydrogen addition on the laminar flame speeds of n-butane flames can be satisfactorily correlated with the response of the corresponding adiabatic flame temperature.
Low-pressure (4.0 kPa) premixed laminar 2,5-dimethylfuran (DMF)/oxygen/argon flame with an equivalence ratio (ø) of 2.0 was studied with tunable vacuum ultraviolet synchrotron radiation photoionization and molecu...
详细信息
Water wall design is a key technology of supercritical pressure CFB boiler. On account of the low heat flux and its homogeneous distribution in furnace, internally ribbed tubes with low mass flux and smooth tubes with...
详细信息
Water wall design is a key technology of supercritical pressure CFB boiler. On account of the low heat flux and its homogeneous distribution in furnace, internally ribbed tubes with low mass flux and smooth tubes with moderate mass flux can be applied in the water wall of supercritical CFB boilers. An experimental research on the flow and heat transfer characteristics of internally ribbed tubes and smooth tubes with different inner diameters was conducted in the range of sub-critical and supercritical pressure. The departure from nucleate boiling (DNB) and dry-out boundary and the empirical correlations of heat transfer are obtained from the experiments. The mathematical model for predicting the circuit mass flux and grid pressure of a flow network system is based on the mass and momentum conservation equations and an iterative method is used to solve the nonlinear equations. Harbin Boiler Works has developed a 600MW supercritical CFB boiler with external heat exchangers and 6 separators. The mass flux and metal temperature distribution of water wall in the CFB boiler are calculated and the results show that the water wall can operate safely at BMCR and 75%BMCR load.
Low pressure premixed laminar n-heptane/propane/O2/N2 flames were investigated with tunable synchrotron vacuum ultraviolet (VUV) photoionization and molecular-beam sampling mass spectrometry. Three flames with differe...
详细信息
A thermal lattice Boltzmann (LB) model is presented for axisymmetric thermal flows in the incompressible limit. The model is based on the double-distribution-function LB method, which has attracted much attention sinc...
详细信息
A thermal lattice Boltzmann (LB) model is presented for axisymmetric thermal flows in the incompressible limit. The model is based on the double-distribution-function LB method, which has attracted much attention since its emergence for its excellent numerical stability over the multispeed LB method. Compared with the existing axisymmetric thermal LB models, the present model is simpler and retains the inherent features of the standard LB method. Numerical simulations are carried out for the thermally developing laminar flows in circular ducts and the natural convection in an annulus between two coaxial vertical cylinders. The Nusselt number obtained from the simulations agrees well with the analytical solutions and/or the results reported in previous studies.
Two-phase flow instability in parallel multi-channel system was studied under rolling motion condition. A parallel nine-channel model was established by using the control volume integrating method based on the homogen...
详细信息
Two-phase flow instability in parallel multi-channel system was studied under rolling motion condition. A parallel nine-channel model was established by using the control volume integrating method based on the homogeneous flow model with considering the rolling motion condition. The gear method was used to solve the control equations. The influences of the entrance, upward sections and the heating power on the flow instability under rolling motion condition were analyzed. The marginal stability boundary (MSB) under rolling motion condition was obtained. The unstable regions occur in both low and high equilibrium quality regions. The region with low inlet sub-cooling is also unstable. In high equilibrium quality region, the multiplied period phenomenon is found and the chaotic phenomenon appears at the MSB.
Chokes are one of the most important components of downhole flow-control equipment. The particle erosion mathematical model, which considers particle-particle interaction, was established and used to simulate solid pa...
详细信息
Chokes are one of the most important components of downhole flow-control equipment. The particle erosion mathematical model, which considers particle-particle interaction, was established and used to simulate solid particle movement as well as particle erosion characteristics of the solid-liquid two-phase flow in a choke. The corresponding erosion reduction approach by setting ribs on the inner wall of the choke was advanced. This mathematical model includes three parts: the flow field simulation of the continuous carrier fluid by an Eulerian approach, the particle interaction simulation using the discrete particle hard sphere model by a Lagrangian approach and calculation of erosion rate using semiempirical correlations. The results show that particles accumulated in a narrow region from inlet to outlet of the choke and the dominating factor affecting particle motion is the fluid drag force. As a result, the optimization of rib geometrical parameters indicates that good anti-erosion performance can be achieved by four ribs, each of them with a height (H) of 3 mm and a width (B) of 5 mm equaling the interval between ribs (L).
暂无评论