检索结果-内蒙古大学图书馆

Polyacrylate modified Cu electrode for selective electrochemical CO_(2) reduction towards multicarbon products

Science Bulletin 2024年第15期69卷 2395-2404页

作者： Yuchuan Shi Kaini Zhang Chung-Li Dong Ta Thi Thuy Nga Miao Wang Daixing Wei Jialin Wang Yiqing Wang Shaohua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China Department of Physics Tamkang UniversityNew Taipei City 25137China

Highly selective production of value-added multicarbon(C^(2+))products via electrochemical CO_(2) reduction reaction(eCO_(2)RR)on polycrystalline copper(Cu)remains ***,the facile surface modification using poly(α-ethyl cyanoacrylate)(PECA)is presented to greatly enhance the C^(2+)selectivity for eCO_(2)RR over polycrystalline Cu,with Faradaic efficiency(FE)towards C^(2+)products increased from30.1%for the Cu electrode to 72.6%for the obtained Cu-PECA electrode at-1.1 V *** hydrogen electrode(RHE).Given the well-determined FEs towards C^(2+)products,the partial current densities for C^(2+)production could be estimated to be-145.4 mA cm~(-2)for the Cu-PECA electrode at-0.9 V *** in a homemade flow ***-situ spectral characterizations and theoretical calculations reveal that PECA featured with electron-accepting-C≡N and-COOR groups decorated onto the Cu electrode could inhibit the adsorption of^(*)H intermediates and stabilize the^(*)CO intermediates,given the redistributed interfacial electron density and the raised energy level of d-band center(E_(d))of Cu active sites,thus facilitating the C-C coupling and then the C^(2+)selective *** study is believed to be guidable to the modification of electrocatalysts and electrodes with polymers to steer the surface adsorption behaviors of reaction intermediates to realize practical eCO_(2)RR towards value-added C^(2+)products with high activity and selectivity.

关键词： Electrochemical CO_(2)reduction Polymer modification Electron transfer C_(2+)products

来源：评论

学校读者我要写书评

暂无评论

Numerical investigations on cluster characteristics in the supercritical water circulating fluidized bed riser

引用

Particuology 2024年第11期94卷 281-293页

作者： Kenan Xi Runqing Li Xiazhi Li Mei Li Xiudong Xu Yu Zhang Hao Wang Youjun Lu Northwest Institute of Nuclear Technology Xi'an710024China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an710049China Xi'an Institute of Applied Optics Xi'an710065China

There are currently no reports about clusters in the supercritical water circulating fluidized bed(SCWCFB).Simulations were conducted to investigate the numbers,diameters,aspect ratios,circularity,and orientation angles of cluster in the riser of SCWCFB via two-fluid model across different flow velocities,solid circulation rates,pressures,and *** results show that cluster numbers are mainly between 10 and 80 per *** are more at the bottom but less at the top,and more near the wall but less at the *** diameters are mainly between 0.2 and 0.5 times the bed *** are large at the bottom but small at the top,and large at the center but small near the *** aspect ratios are mainly between 0 and 1,indicating that most clusters have shorter width than their ***-like clusters are more likely to appear near the walls,and clusters at the center of the riser are more likely to be *** circularity is mainly between 0.2 and 0.4,suggesting that the shapes of clusters are far from the *** absolute values of cluster orientation angles are mainly between 75°and 90°,indicating that most clusters move in the vertical *** fluid velocities may facilitate cluster coalescence.

关键词： Supercritical water Circulating fluidized bed Cluster Two-fluid model Riser

来源：评论

学校读者我要写书评

暂无评论

DISTRIBUTED MULTI-ENERGY SYSTEMS CONSIDERING power-TO-X TECHNOLOGY: PLANNING, SCHEDULING, AND PERFORMANCE ASSESSMENT 37

DISTRIBUTED MULTI-ENERGY SYSTEMS CONSIDERING POWER-TO-X TECH...

引用

37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2024

作者： Xue, Kai Wang, Jinshi Han, Xiaoqu Zhao, Quanbin Chong, Daotong Chen, Weixiong Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shannxi Xi'an China

ISBN: (纸本)9798331307660

The distributed multi-energy systems place emphasis on the complementary and local application of heterogeneous energy sources, and power to methanol process can be coupled, reducing carbon emissions while increasing the *** providing an economical and low-carbon solution, a real community energy system integrated with solar energy and natural gas has been investigated in this *** at the minimization of the daily cost referring to the net expenditure after considering the offsetting benefits, the carbon capture, water electrolysis, and methanol synthesis are combined, with the methanol and oxygen exported as *** capacity planning and operation scheduling have been performed, and the results indicated that the daily cost can be reduced by 69.67% compared to the conventional energy supply after the scheduling *** the case scenario and typical day, the production of methanol and oxygen is 6.30 t and 13.49 t based on an electricity demand of 28.78 MWh and a heat demand of 11.85 *** to the contribution of carbon capture, the purchase of 5.90 t of carbon allowances is avoided and instead there are 3.86 t of allowances available for ***, the effect of device capacity and operating parameters on economics has been *** study could help to promote the application of power to methanol in distributed energy systems. © 2024 37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2024. All rights reserved.

关键词： Carbon capture and utilization

来源：评论

学校读者我要写书评

暂无评论

Construction of Z-Scheme In_(2)S_(3)-TiO_(2) for CO_(2) Reduction under Concentrated Natural Sunlight

引用

Chinese Journal of Structural Chemistry 2022年第1期41卷 34-39页

作者： Ya Liu Fangbo Yu Feng Wang Shengjie Bai Guiwei He State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

Producing chemical fuels from sunlight enables a sustainable way for energy *** various solar fuel generation approaches,photocatalytic CO_(2) reduction has the advantages of simple structure,mild reaction condition,directly reducing carbon emissions,***,most of the current photocatalytic systems can only absorb the UV-visible spectrum of solar ***,finding a way to utilize infrared light in the photocatalytic system has attracted more and more ***,a Z-scheme In_(2)S_(3)-TiO_(2) was constructed for CO_(2) reduction under concentrated natural *** infrared light was used to create a high-temperature environment for photocatalytic *** evolution rates of H2,CO,and C2H5OH reached 262.2,73.9,and 27.56μmol・h^(-1)・g^(-1),respectively,with an overall solar to fuels efficiency of 0.002%.This work provides a composite photocatalyst towards the utilization of full solar light spectrum,and could promote the research on photocatalytic CO_(2) reduction.

关键词： solar energy CO_(2) In_(2)S_(3) TiO_(2)

来源：评论

学校读者我要写书评

暂无评论

High tension cyclic hydrocarbons synthesized from biomass-derived platform molecules for aviation fuels in two steps

引用

Green Energy & Environment 2023年第1期8卷 331-337页

作者： Zhanchao Li Yizhuo Wang Qing Li Liqing Xu Hong Wang Frontier Institute of Science and Technology Xi'an Jiaotong UniversityXi'an710054China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an710054China

Synthesizing ring structure aviation fuels from biomass-derived platform molecules is challenging,especially for bridged ring structure aviation fuels which are typically achieved from fossil-derived ***,we report the synthesis of a series of ring structure biofuels in two steps by a combination of a solvent-free Michael-cyclization reaction and a hydrodeoxygenation(HDO)reaction from lignocellulosederived 5,5-dimethyl-1,*** biofuels are obtained with high overall yields up to 90%,which exhibit high densities of 0.81 g cm^(-3)-0.88 g cm^(-3)and high volumetric neat heat of combustion(VNHOC)values of 36.0 MJ L^(-1)-38.6 MJ L^(-1).More importantly,bridged-ring structure hydrocarbons can also be achieved in two steps by a combination of a Robinson annulation reaction and an HDO reaction to afford the final products at high overall yields up to 90%.The bridged-ring structure products have comparable high densities and high VNHOC values to the best artificial fuel JP-10(0.94 g cm^(-3)and 39.6 MJ L^(-1)).The results demonstrate a promising way for the synthesis of high-density aviation fuels with different fuel properties at high yields.

关键词： Biofuels 5,5-Dimethyl-1,3-cyclohexanedione Solvent-free Michael-cyclization Robinson annulation Green reaction

来源：评论

学校读者我要写书评

暂无评论

EXPERIMENTAL INVESTIGATION ON THE TRANSCRITICAL DYNAMIC CHARACTERISTICS OF WATER WALL FOR A SUPERCRITICAL CFB BOILER

EXPERIMENTAL INVESTIGATION ON THE TRANSCRITICAL DYNAMIC CHAR...

引用

ASME 2024 International Mechanical engineering Congress and Exposition, IMECE 2024

作者： Yang, Dong An, Ning Du, Xiaocheng Han, Lei Guo, Zerui Wei, Ziyu State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shaanxi Xi'an China

ISBN: (纸本)9780791888667

When the boiler load varies, the operational parameters in the water wall will change, this process is called as dynamic process. Dynamic process presents unique flow and heat transfer phenomena within the water wall. To investigate the process, the research was conducted in a vertical upward smooth tube for a supercritical circulating fluidized bed (CFB) boiler. Experiments were conducted to explore the dynamic characteristics during transcritical pressure process. The results indicate that as system pressure decreases from 23 MPa to 21 MPa, the mass flux within the tube increases sharply, and the outlet fluid temperature decreases. Concurrently, a rapid rise in wall temperature was observed. As the inlet mass flux increases, the wall temperature eventually returns to the normal value. The dynamic heat transfer coefficients were calculated throughout the transcritical pressure process, revealing stages of heat transfer deterioration, subcooled boiling, and single-phase water heat transfer. In addition, experiments and numerical simulations were carried out to explore the dynamic characteristics at supercritical pressure. The dynamic response curves during the step process of heat flux and inlet enthalpy under supercritical pressure conditions were obtained. As the inlet enthalpy decreases, the system mass flux increases, and as the heat flux increases, the system mass flux decreases. And there is no rise in wall temperature during the dynamic response at supercritical pressure. Copyright © 2024 by ASME.

关键词： Water tube boilers

来源：评论

学校读者我要写书评

暂无评论

Experimental study on flow excursion instability of supercritical hydrocarbon fuel in scramjet regenerative cooling parallel channels

引用

Chinese Journal of Aeronautics 2023年第1期36卷 201-215页

作者： Xiaoyong LIU Zhuqiang YANG Ruipu MIAO Feng LIU Shujun ZHAO Qincheng BI Beijing Power Machinery Research Institute Beijing 100074China Liaoning Key Laboratory of Complex Energy Conversion and Utilization School of Energy and Power EngineeringDalian University of TechnologyDalian 116024China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

flow instability of supercritical hydrocarbon fuel is a crucial issue in scramjet regenerative cooling structure. In this study, flow excursion instability and flow distribution in parallel tubes were experimentally studied for supercritical fluids. Two types of flow excursion occur in a single tube. Type Ⅰ and Type Ⅱ excursions, and they are corresponding to decreasing and increasing flow rate respectively. They can trigger flow maldistribution between parallel tubes and the hysteresis phenomenon of flow distribution. The effects of system parameters, including inlet temperature,system pressure, and heat flux, on flow distribution were analyzed. In addition, the relationship between flow excursion and the pseudo-critical interval proposed in the literature was established according to the heated tube outlet temperature at the onset of flow instability. Finally, the flow excursion instability boundary was obtained using two dimensionless parameters. These experimental results can provide helpful insight on the mechanism of Scramjet regenerative cooling.

关键词： flow distribution Ledinegg instability Onset of flow excursion Parallel channels Regenerative cooling Scramjet Supercritical flow

来源：评论

学校读者我要写书评

暂无评论

Fast design of catalyst layer with optimal electrical-thermal-water performance for proton exchange membrane fuel cells

引用

Journal of Energy Chemistry 2023年第6期81卷 642-655,I0014页

作者： Jing Yao Yuchen Yang Xiongpo Hou Yikun Yang Fusheng Yang Zhen Wu Zaoxiao Zhang School of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’an 710049ShaanxiChina State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049ShaanxiChina

The catalyst layer(CL)is the core component in determining the electrical-thermal-water performance and cost of proton exchange membrane fuel cell(PEMFC).Systemic analysis and rapid prediction tools are required to improve the design efficiency of *** this study,a 3D multi-phase model integrated with the multi-level agglomerate model for CL is developed to describe the heat and mass transfer processes inside ***,a research framework combining the response surface method(RSM)and artificial neural network(ANN)model is proposed to conduct a quantitative analysis,and further a rapid and accurate *** the help of this research framework,the effects of CL composition on the electrical-thermal-water performance of PEMFC are *** results show that the mass of platinum,the mass of carbon,and the volume fraction of dry ionomer has a significant impact on the electrical-thermal-water *** the selected points,the sensitivity of the decision variables is ranked:volume fraction of dry ionomer>mass of platinum>mass of carbon>agglomerate *** particular,the sensitivity of the volume fraction of dry ionomer is over 50%at these ***,the comparison results show that the ANN model could implement a more rapid and accurate prediction than the RSM model based on the same sample *** in-depth study is beneficial to provide feasible guidance for high-performance CL design.

关键词： Catalyst layer Agglomerate model Sensitivity analysis Response surface Artificial neural network

来源：评论

学校读者我要写书评

暂无评论

Morphology Structure Evolution and Combustion Reactivity of Bituminous Char at Around Ash Melting Temperature

引用

Journal of Thermal Science 2022年第6期31卷 2189-2202页

作者： ZHANG Yandi YANG Huan WANG Bo HMShahzaib KHAN DUAN Xiaoli LIU Yinhe State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi'an Jiaotong UniversityXi'an 710049China

In slag tapping furnaces, char particles undergo a series of complex structural evolution before and after being captured by the liquid slag layer. The evolution results affect the carbon conversion rate and are affected by temperature fluctuations, especially in the ash melting temperature zone. Experimental study on structure evolution of bituminous char prepared at around ash melting temperature was carried out on a fixed bed. The morphology, specific surface area and mineral chemical composition were measured at different temperatures. Experimental results show that the number density and the size of ash droplets exuded on the char surface increased significantly with the increasing temperature. The ash specific surface area from gasification was slightly greater than that from combustion. The residual content of chloride in the char become 1% and the contents of Fe, K, Mg and Na decrease significantly during the pyrolysis process across the ash melting temperature zone. The diffraction intensity of oldhamite increase which indicates the reaction of carbon substrate with minerals during the evolution;the diffraction intensity of quartz dramatically decreases for the reason of anorthite generation. The ignition and burnout temperatures of char were found to increase and the combustion stability decreased with the increasing pyrolysis temperature.

关键词： coal char structure evolution carbothermal reaction combustion

来源：评论

学校读者我要写书评

暂无评论

Numerical Stability and Accuracy of Contact Angle Schemes in Pseudopotential Lattice Boltzmann Model for Simulating Static Wetting and Dynamic Wetting

引用

Computer Modeling in engineering & Sciences 2023年第10期137卷 299-318页

作者： Dongmin Wang Gaoshuai Lin Key Laboratory of Multiphase Flow and Heat Transfer in Shanghai Power Engineering School of Energy and Power EngineeringUniversity of Shanghai for Science and TechnologyShanghai200093China Jiangsu Key Laboratory of Micro and Nano Heat Fluid Flow Technology and Energy Application Suzhou University of Science and TechnologySuzhou215009China

There are five most widely used contact angle schemes in the pseudopotential lattice Boltzmann(LB)model for simulating the wetting phenomenon:The pseudopotential-based scheme(PB scheme),the improved virtualdensity scheme(IVD scheme),the modified pseudopotential-based scheme with a ghost fluid layer constructed by using the fluid layer density above the wall(MPB-C scheme),the modified pseudopotential-based scheme with a ghost fluid layer constructed by using the weighted average density of surrounding fluid nodes(MPB-W scheme)and the geometric formulation scheme(GF scheme).But the numerical stability and accuracy of the schemes for wetting simulation remain unclear in the *** this paper,the numerical stability and accuracy of these schemes are clarified for the first time,by applying the five widely used contact angle schemes to simulate a two-dimensional(2D)sessile droplet on wall and capillary imbibition in a 2D channel as the examples of static wetting and dynamic wetting simulations respectively.(i)It is shown that the simulated contact angles by the GF scheme are consistent at different density ratios for the same prescribed contact angle,but the simulated contact angles by the PB scheme,IVD scheme,MPB-C scheme and MPB-W scheme change with density ratios for the same fluid-solid interaction *** PB scheme is found to be the most unstable scheme for simulating static wetting at increased density ratios.(ii)Although the spurious velocity increases with the increased liquid/vapor density ratio for all the contact angle schemes,the magnitude of the spurious velocity in the PB scheme,IVD scheme and GF scheme are smaller than that in the MPB-C scheme and MPB-W scheme.(iii)The fluid density variation near the wall in the PB scheme is the most significant,and the variation can be diminished in the IVD scheme,MPB-C scheme *** variation totally disappeared in the GF scheme.(iv)For the simulation of capillary imbibition,the MPB-C scheme,MPB-Wschem

关键词： Pseudopotential lattice Boltzmann model contact angle scheme static wetting dynamic wetting capillary imbibition

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：