检索结果-内蒙古大学图书馆

Precipitation Behavior of MnS Inclusion in Unidirectionally-solidified Fe–18Mn–1Al–0.3C Steels

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan 2025年第3期111卷 122-130页

作者： Fan, Yuewen Kameda, Kouki Hu, Xiaojun Matsuura, Hiroyuki State Key Laboratory of Advanced Metallurgy University of Science and Technology Beijing China Department of Materials Engineering Graduate School of Engineering The University of Tokyo Japan

In order to reasonably control the precipitation of inclusions during solidification in TWIP steels, the precipitation behavior of typical MnS inclusions in high manganese steel was investigated by unidirectional solidification experiments. Through the combined analyses using ASEM-EDS, optical microscope, and thermodynamic calculation, it was found that Mn concentration in the liquid metal region were higher than those in the solid metal region. Furthermore, closer to the inclusion the liquid phase was, higher its Mn content was. In Fe–18mass%Mn–1Al–0.3C, MnS inclusions can precipitate at the positions located in the junction of dendrites at the end of the solidification (solid fraction fS = 0.96), Mn content reaching 34.88 mass%. Already existing Al2O3 particles could become the core of MnS to form composite inclusions to promote the MnS precipitation during the solidification process. When fS achieved 0.7 leading the Mn segregation in the liquid phase to 25 mass%, MnS starts to precipitate to attach the Al2O3 surface to form composite inclusion. © 2025 The Iron and Steel Institute of Japan.

关键词： Manganese steel

来源：评论

学校读者我要写书评

暂无评论

DNA-based recyclable moist-electric generator

引用

Friction 2025年第2期13卷 57-62页

作者： Tianlei Guang Yaxing Huang Haiyan Wang Tiancheng He Kaixuan Zhu Yujuan Zhang Hongfei Shang Jian Li Huhu Cheng Liangti Qu Laboratory of Flexible Electronics Technology Key Laboratory of Organic Optoelectronics&Molecular EngineeringMinistry of EducationDepartment of ChemistryTsinghua UniversityBeijing 100084China State Key Laboratory of Tribology in Advanced Equipment Tsinghua UniversityBeijing 100084China School of Chemical Engineering and Technology North University of ChinaTaiyuan 030051China State Key Laboratory of Special Surface Protection Materials and Application Technology Wuhan Research Institute of Materials ProtectionWuhan 430000China

Recently developed moist-electric generator(MEG)can spontaneously produce electricity after absorbing water from the air,delivering an interesting and novel power harvesting *** employment of environment-friendly biological substrates in MEGs has demonstrated the favorable electricity generation capacity,however,which always requires a careful cultivation process or gentle storage *** this regard,the extremely abundant DNA formed porous membrance is fabricated to construct a novel recyclable DNA based MEG(DNA-MEG)which produces a stable voltage of ca.0.3 V with a current density of ca.1.2μA·cm−2,as well as a maximum power density of 0.36μW·cm−2 at~90%relative humidity ***,benefited from excellent water-solubility,this freeze-drying DNA membrance can be easily recycled after DNA-MEG damaged and the reborned device still shows favorable electricity generation *** addition,several DNA-MEGs in parallel or series can power up light-emitting diodes and so on for *** stable and recyclable DNA-MEG will provide new insights for moisture power generation device design and enlarge the practical regions greatly.

关键词： moist-electric generator(MEG) DNA biological substrates electricity generation

来源：评论

学校读者我要写书评

暂无评论

Micro-strain regulation strategy to stabilize perovskite lattice based on the categories and impact of strain on perovskite solar cells

引用

Journal of Energy Chemistry 2025年第1期100卷 578-604页

作者： Caixia Li Wenwu Liu Shiji Da Lingbin Kong Fen Ran State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of TechnologyLanzhou 730050GansuChina School of Materials Science and Engineering Lanzhou University of TechnologyLanzhou 730050GansuChina

Photovoltaic metal halide perovskite solar cells(PSCs) convert light to electricity more efficiently than crystalline silicon cells, and the cost of materials used to make them is lower than that of silicon *** efficiency is not a core issue affecting the application of perovskite solar cells in special *** present, stability is the major technical encounters that hinders its further commercial development. Microstrain in PSCs is currently a significant factor responsible for the device's instability. Strain-induced ion migration is widely believed to accelerate perovskite degradation even when external stimuli are ***, it is imperative to study strain to enhance the stability of PSCs. This paper reviews recent developments to understand strain's origin and effect mechanisms on performance of PSCs, including ion migration,failure behavior, defect formation, and its effect on photoelectric properties, stability, and ***, several well-known strain management strategies are systematically introduced based on the strain effect mechanism and strain engineering on the film, providing more clues for further preparation with increased stability. The manipulation of external physical strain applied from films to entire devices has been extensively studied. Furthermore, recommendations for future research directions and chemical approaches have been provided. It is emphasized that strain engineering plays a crucial role in improving the efficiency and longevity of PSCs. Tensile strain causes rapid degradation, while moderate compressive strain and external strain control could improve properties and stability. Efforts should focus on controlling compressive strain to mitigate residual tensile strain and introducing it in a controlled manner. Future research endeavors may focus on exploring these pathways to improve the efficiency and lifespan of PSCs.

关键词： Halide perovskite solar cells Strain origins Strain effects Strain management

来源：评论

学校读者我要写书评

暂无评论

Al-F co-doping towards enhanced electrolyte-electrodes interface properties for halide and sulfide solid electrolytes

引用

Chinese Chemical Letters 2025年第1期36卷 610-617页

作者： Han Yan Jingming Yao Zhangran Ye Qiaoquan Lin Ziqi Zhang Shulin Li Dawei Song Zhenyu Wang Chuang Yu Long Zhang College of Physics and Energy Fujian Normal UniversityFuzhou 350117China Clean Nano Energy Center State Key Laboratory of Metastable Materials Science and TechnologyYanshan UniversityQinhuangdao 066004China Tianjin Key Laboratory for Photoelectric Materials and Devices School of Materials Science and EngineeringTianjin University of TechnologyTianjin 300384China Guilin Electrical Equipment Scientific Research Institute Co. Ltd.Guilin 541004China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430000China

All-solid-state Li batteries(ASSLBs)using solid electrolytes(SEs)have gained significant attention in recent years considering the safety issue and their high energy *** these advantages,the commercialization of ASSLBs still faces challenges regarding the electrolyte/electrodes interfaces and growth of Li *** doping is an effective and direct method to enhance the performance of ***,we report an Al-F co-doping strategy to improve the overall properties including ion conductivity,high voltage stability,and cathode and anode ***,the Al-F co-doping enables the formation of a thin Li-Al alloy layer and fluoride interphases,thereby constructing a relatively stable interface and promoting uniform Li *** similar merits of Al-F co-doping are also revealed in the Li-argyrodite *** assembled with these optimized electrolytes gain good electrochemical performance,demonstrating the universality of Al-F co-doping towards advanced SEs.

关键词： Solid electrolytes Li halides Li_(2)ZrCl_(6) Li argyrodites Fluorine doping

来源：评论

学校读者我要写书评

暂无评论

Enhanced rate capability and cycle stability of Ti2C MXene for sodium storage through an aniline molecules welding strategy

引用

Tungsten 2025年第1期7卷 161-171页

作者： Hao Chen Ya-Qin Wang Dong-Ting Zhang Bei Zhao Min-Peng Li Chen-Yang Li Tian-Peng Xu Mao-Cheng Liu State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals Lanzhou University of Technology School of Materials Science and Engineering Lanzhou University of Technology School of Computer and Communication Technology Lanzhou University of Technology

MXenes obtained significant attention in the field of energy storage devices due to their characteristic layered structure,modifiable surface functional groups,large electrochemically active surface,and regulable interlayer ***,the self-restacking and sluggish ions diffusion kinetics performance of MXenes during the alkali metal ions insertion/extraction process severely impedes their cycle stability and rate *** paper proposes an aniline molecule welding strategy for welding p-phenylenediamine（PPDA） into the interlayers of Ti2C through a dehydration condensation *** welded PPDA molecules can contribute pillar effect to the layered structure of *** pillar effect effectively maintains the structural stability during the sodium ions insertion/extraction process and effectively expands the interlayer spacing of Ti2C from 1.16 to 1.38 nm,thereby enhancing ions diffusion kinetics performance and improving the long-term cycle *** Ti2C-PPDA demonstrates outstanding Na+storage capability,exhibiting a specific capacity of 100.2 mAh·g-1at a current density of 0.1 A·g-1over 960 cycles and delivering a remarkable rate capability 81.2 mAh·g-1at a current density of 5 A·*** study demonstrates that expanding interlayer spacing is a promising strategy to enhance the Na+storage capacity and improve long-term cycling stability,which provides significant guidance for the design of two-dimensional Na+storage materials with high-rate capability and cycle stability.

关键词： Ti_2C Expanding interlayer spacing Sodium ions storage Diffusion kinetics Rate capability

来源：评论

学校读者我要写书评

暂无评论

FPGA Real-Time Deployment of Low-Complexity Volterra Equalizer Based on Pruning and Non-Uniform Quantization

引用

Journal of Lightwave technology 2025年第9期43卷 4183-4192页

作者： Sun, Xinda Wang, Kaihui Zhu, Zonghui Zhang, Long Gou, Yumeng Meng, Yuanxiao Chen, Yun Yu, Jianjun Fudan University Department of Communication Science and Engineering State Key Laboratory of ASIC and System Key Laboratory for Information Science of Electromagnetic Waves School of Information Science and Technology Shanghai 200433 China Fudan University Shanghai200433 China

Electronic nonlinear equalization technology is a promising signal impairments compensation technique with great development potential and wide application scenarios. However, its high complexity makes it challenging to implement in field-programmable gate array (FPGA). We propose a low-complexity real-time nonlinear equalization scheme based on FPGA, which can provide similar performance as traditional schemes but only occupies very low digital signal processing (DSP) resources. With the help of this scheme, by using pruning and non-uniform quantization, the computational complexity of a Volterra equalizer with 15 linear taps and 25 nonlinear taps is comparable to that of a Volterra equalizer with 8 linear taps and 4 nonlinear taps. By non-uniformly quantizing the taps of the equalizer, the quantization accuracy can be saved compared to uniform quantization, and after the taps are quantized, complex multiplication can be replaced by simple shift operations, simplifying the complexity of multiplication operations. The scheme of weight pruning and non-uniform quantization significantly reduces the required hardware resources and power consumption. We verify the proposed scheme in a decision-directed Volterra (DD-Volterra) equalizer, The equalizer was successfully deployed in a 230.4 MHz xcvu9pflgb2104-2-I Xilinx FPGA and achieved real-time IM/DD transmission of 29.4912 Gbit/s PAM4 signals over 25 km standard single-mode fiber (SSMF), meeting the 3.8 × 10-3 hard-decision forward error correction (HD-FEC) standard. The results show that the proposed low-complexity Volterra equalizer scheme can reduce DSP resources by up to 75.3% and power consumption by 26.2%. © 1983-2012 IEEE.

关键词： Forward error correction

来源：评论

学校读者我要写书评

暂无评论

Multi-scale dispersion strengthening for high-temperature titanium alloys:Strength preservation and softening mechanisms

引用

材料科学技术（英文版） 2025年第3期206卷 1-14页

作者： Xin Chen Lujun Huang Shuo Ma Fengbo Sun Shuai Wang Lin Geng School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China

The long-lasting expectation"the hotter the engine,the better"calls for the development of high-temperature metallic *** the high specific strengths of titanium alloys are compelling for such applications,their deleterious softening beyond 600 ℃ imposes serious *** has been known for decades regarding the phase metallurgy for precipitation strengthening design in titanium al-loys,however,the other facile strength promotion mechanism,dispersion strengthening,remains compar-atively less-explored and *** present research concerns the multi-scale dispersion strength-ening in titanium alloys,with mechanistic emphases on the critical plasticity micro-events that affect strength *** to the simultaneous introduction of intragranular dispersoids and intergran-ular reinforcers,the current titanium alloys present superior engineering tensile strength of 519 MPa at 700 ℃.Throughout the examined 25-800 ℃ temperature range,noticeable softening induced by the ther-mal activation occurs above 600 ℃,accompanied by evident strength *** temperature-dependence transition of dominated softening mechanisms from dynamic recovery to dynamic recrystallization has been clarified by theoretical ***,the strengthening effect of multi-scale architec-tures is underpinned as the enhanced dislocation strengthening owing to the introduction of thermally-stable heterointerfaces,which could generically guide the design of similar heat-resistant titanium alloys.

关键词： Titanium-based alloys Multi-scale architectures Mechanical properties Temperature dependence Dislocation strengthening

来源：评论

学校读者我要写书评

暂无评论

Novel Inertia Control Method with Phase-Locked Error Feedforward in PLL for DFIG-Based WTs

Novel Inertia Control Method with Phase-Locked Error Feedfor...

引用

International Conference of Electrical, Electronic and Networked Energy Systems, EENES 2024

作者： Yu, Jiawei Zhu, Yihua Zhou, Yini Hu, Bo Li, Zheyu Li, Xiaoyu State Key Laboratory of HVDC Electric Power Research Institute China Southern Power Grid Guangzhou510663 China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819620418

The large-scale access of wind power causes a significant reduction in the inertia of the power system, seriously threatening the security and stability of the system frequency. Inertia control methods based on the optimized PLLs provide a solution to the low inertia problem of doubly-fed inductance generator (DFIG)-based wind turbines (WTs), but they still suffer from poor dynamic performance and obvious phase-locked error in steady state. For this reason, a novel inertia control method for DFIG-based WTs is proposed in this paper to support the system frequency with better performance in all aspects. Firstly, an equivalent inertia model is deduced considering the dynamic of control and the reason why modifying PLL can realize inertia response of WT is analyzed. Then, the existing inertia control methods based on optimized PLL is introduced and a novel inertia control method with phase-locked error feed-forward in PLL (pefPLL) is proposed. After that, the inertia characteristics, dynamic performance, and steady state performance of pefPLL and other PLLs are compared. Finally, the superiority of the novel inertia control method with pefPLL is verified by simulations. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Wind turbines

来源：评论

学校读者我要写书评

暂无评论

Adsorption removal of mercury from flue gas by metal selenide:A review

引用

Journal of Environmental Sciences 2025年第2期148卷 420-436页

作者： Yang Zheng Guoliang Li Yi Xing Wenqing Xu Tao Yue School of Energy and Environmental Engineering University of Science and Technology BeijingBeijing 100083China State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China CAS Key Laboratory of Green Process and Engineering Institute of Process EngineeringInnovation Academy for Green ManufactureChinese Academy of SciencesBeijing 100190China

Mercury(Hg)pollution has been a global concern in recent decades,posing a significant threat to entire ecosystems and human health due to its cumulative toxicity,persistence,and transport in the *** intense interaction between mercury and selenium has opened up a new field for studying mercury removal from industrial flue gas *** the advantages of good Hg^(0) capture performance and lowsecondary pollution of the mineral selenium compounds,the most noteworthy is the relatively low regeneration temperature,allowing adsorbent regeneration with low energy consumption,thus reducing the utilization cost and enabling recovery of mercury *** paper reviews the recent progress of mineral selenium compounds in flue gas mercury removal,introduces in detail the different types ofmineral selenium compounds studied in the field ofmercury removal,reviews the adsorption performance of various mineral selenium compounds adsorbents on mercury and the influence of flue gas components,such as reaction temperature,air velocity,and other factors,and summarizes the adsorption mechanism of different fugitive forms of selenium *** on the current research progress,future studies should focus on the economic performance and the performance of different carriers and sizes of adsorbents for the removal of Hg^(0) and the correlation between the gas-particle flow characteristics and gas phase mass transfer with the performance of Hg^(0) removal in practical industrial *** addition,it remains a challenge to distinguish the oxidation and adsorption of Hg^(0) quantitatively.

关键词： Non-conventional pollutants Adsorbents Metal selenides Flue gas Mercury removal

来源：评论

学校读者我要写书评

暂无评论

Microstructure and mechanical properties of high-pressure sintered B6O-SiC nanocomposites

引用

材料科学技术（英文版） 2025年第1期204卷 238-244页

作者： Bin Zhang Rongxin Sun Pan Ying Song Zhao Yitong Zou Lei Sun Zihe Li Yufei Gao Mengdong Ma Lingyu Liu Chao Liu Bo Xu Center for High Pressure Science(CHiPS) State Key Laboratory of Metastable Materials Science and TechnologyYanshan UniversityQinhuangdao 066004China National Key Laboratory of Advanced Casting Technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of Education Nanjing University of Science and TechnologyNanjing 210094China Key Laboratory of Materials and Surface Technology(Ministry of Education) School of Materials Science and EngineeringXihua UniversityChengdu 610039China School of Materials Science and Engineering Faculty of Materials Metallurgy and ChemistryJiangxi University of Science and TechnologyGanzhou 341000China

Boron suboxide(B6O)is recognized as a superhard material with a low mass density,high resistance to chemical wear,and excellent wear *** its desirable properties,the limited fracture tough-ness of B6O restricts its application in industrial *** study presents the structural and me-chanical characterization of B6O-SiC nanocomposites,which were synthesized via a high-pressure high-temperature sintering process of B6O powders and SiC *** sintering process induced fragmen-tation of SiC whiskers,resulting in the homogenous distribution of SiC fragments within the B6O *** increase in SiC content was observed to decrease the composite's hardness,while initially reducing then enhancing its *** nanocomposites containing 20 wt％and 30 wt％SiC whiskers exhibited significant improvements in fracture toughness,averaging 6.5 MPa m1/2 and 7.0 MPa m1/2,respectively-approximately threefold the toughness of polycrystalline B6O-while sustaining high hardness values of 36.3 GPa and 35.6 GPa on *** analyses revealed that the composites'superior me-chanical performance is due to the presence of strong grain boundaries,as well as a high density of nan-otwins and stacking *** findings demonstrate a viable method for producing B6O-based nanocom-posites with enhanced hardness and toughness,potentially expanding their industrial applicability.

关键词： B6O Ceramic nanocomposite Mechanical properties Microstructure

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：