The emerging trend in wireless hospitals requires the development of bio-signal acquisition devices to be easily integrated into a single clinical routine. The wired devices used in hospitals and clinics, which makes ...
详细信息
The emerging trend in wireless hospitals requires the development of bio-signal acquisition devices to be easily integrated into a single clinical routine. The wired devices used in hospitals and clinics, which makes setup very inconvenient, costly, and difficult to manage patients. It is crucial to develop and design a clinical diagnostic system that takes bio-signal from the body of the patient and transmits wirelessly to the physicians/hospital. In this paper, we have designed a novel portable system for ECG signal acquisition, processing, and wireless transmission using a ZigBee module. Our portable design enhances mobility, small in size, and very cheap for long term monitoring of cardiac patients. The results show that the ECG wave successfully transmitted to the physician, and heartbeat values are visible to the patient. Furthermore, the results of the ECG wave are unclear when the position of electrodes is dislocated. The emerging trend in wireless hospitals requires the development of bio-signal acquisition devices to be easily integrated into a single clinical routine. The wired devices used in hospitals and clinics, which makes setup very inconvenient, costly, and difficult to manage patients. It is crucial to develop and design a clinical diagnostic system that takes bio-signal from the body of the patient and transmits wirelessly to the physicians/hospital. In this paper, we have designed a novel portable system for ECG signal acquisition, processing, and wireless transmission using a ZigBee module. Our portable design enhances mobility, small in size, and very cheap for long term monitoring of cardiac patients. The results show that the ECG wave successfully transmitted to the physician, and heartbeat values are visible to the patient. Furthermore, the results of the ECG wave are unclear when the position of electrodes is dislocated.
This paper is about charging E-vehicle module using the Solar panel, availability of maximum power is viewed by IOT device and the maximum power generated by the solar is being tracked using the MPPT controller. The s...
详细信息
ISBN:
(纸本)9781538695333
This paper is about charging E-vehicle module using the Solar panel, availability of maximum power is viewed by IOT device and the maximum power generated by the solar is being tracked using the MPPT controller. The simulation model is designed using Proteus software. The whole setup is connected to the arduino uno r3, the battery level, generated and distributes an amount of the battery is viewed using an LCD. GSM modem is used to get an alert message for any reduction of power occurred in the system. A web page is used to check the availability status of charge, the amount of power transferred to the charging module and the available location for the charging station can be displayed. The main idea of this paper is to reduce greenhouse gas emission and fossil fuel.
In today39;s world of technology, a major change can be seen as an advantage, vehicles are getting transformed from internal combustion engine to solar/electrical source. Greater fossil fuel consumption and air poll...
详细信息
ISBN:
(纸本)9781728149561
In today's world of technology, a major change can be seen as an advantage, vehicles are getting transformed from internal combustion engine to solar/electrical source. Greater fossil fuel consumption and air pollution especially in urban areas are the primary reasons for this transformation. Forreduction of dependency on fossil fuel and to have a reduced environmental pollution electrification of vehicle is a potential solution. However, this transformation isn't forthright and requires complex controls. The main area of this Electric Vehicle is that it runs on BLDC motor which is controlled by its controller, responsible for3 phase commutation. Moreover, monitoring of essential parameters has also kept as the main concern in this vehicle.
LPG is widely used for cooking in many countries for economic reasons, for convenience or because it is the preferred fuel source. This paper focuses on the application of the IoT which is used for measuring and displ...
详细信息
ISBN:
(纸本)9781538695333
LPG is widely used for cooking in many countries for economic reasons, for convenience or because it is the preferred fuel source. This paper focuses on the application of the IoT which is used for measuring and displaying the gasoline content present in household LPG cylinder and this is helpful in automatic booking of new LPG cylinder and also detect the gas leakage. Usually the capacity of LPG in Cylinder is not determined, so we are going to display the level of LPG. The level of LPG is measured using load sensor (SEN-10245). The output of the sensor is connected with arduino *** use of GSM Module, the information is sent to user by SMS (short messaging service) and also automatic booking is done by dialing the registered gas booking number. Then the gas leakage is detected by gas sensor (MQ-6). By using this, we can detect the current LPG level and it is continuously displayed on the LCD. We can know the validity of LPG usage from the date of initialization. By use of IOT the user is alerted by giving the message to their mobile phone when the LPG level is critically low(below 20%).Automatic booking of new LPG by auto dialing of gas booking number and by this we prevent pre-booking and late booking. Then by detecting the gas leakage we can prevent the LPG gas burst accidents in the home.
为解决普通轮式小车在狭小环境无法移动工作的缺陷,利用寻光模式实现带麦克纳姆轮小车的各种运动状态。介绍麦克纳姆轮全方位运动的工作原理,以arduino uno r3为控制中心,联合寻光检测模块,使设计的小车能够发现光源并向光源移动。仿真...
详细信息
为解决普通轮式小车在狭小环境无法移动工作的缺陷,利用寻光模式实现带麦克纳姆轮小车的各种运动状态。介绍麦克纳姆轮全方位运动的工作原理,以arduino uno r3为控制中心,联合寻光检测模块,使设计的小车能够发现光源并向光源移动。仿真和实物测试结果表明,设计得到的寻光追踪四轮小车在无光情况下,处于静止状态;在有光情况下,通过判断光源的所在地,能够准确向光源所在地运动。
文中将传感技术、无线传输技术和Scikit-learn相结合,设计一种基于物联网的智能天气识别系统,可实时播报天气情况。该系统采用DS18B20测温模块、DHT11湿度采集模块收集温湿度信息,通过arduino uno r3开发板采集天气信息,由CC2530模块将...
详细信息
文中将传感技术、无线传输技术和Scikit-learn相结合,设计一种基于物联网的智能天气识别系统,可实时播报天气情况。该系统采用DS18B20测温模块、DHT11湿度采集模块收集温湿度信息,通过arduino uno r3开发板采集天气信息,由CC2530模块将采集到的温度、湿度信息通过无线网络传输给上位机,通过上位机的Scikit-learn训练模型实现对天气状况的实时识别。实验表明,所提系统可获取当前小范围地区较精确的天气信息,实验结果良好。
介绍了一款基于语音识别技术的智能分类垃圾桶。该垃圾桶以arduino uno r3开发板为控制中心,通过集成人体红外热释电运动传感器、LD3320语音识别芯片、VS1053语音播报芯片、SG90舵机、*** GPS芯片等硬件设备实现了人体感测,垃圾分类识...
详细信息
介绍了一款基于语音识别技术的智能分类垃圾桶。该垃圾桶以arduino uno r3开发板为控制中心,通过集成人体红外热释电运动传感器、LD3320语音识别芯片、VS1053语音播报芯片、SG90舵机、*** GPS芯片等硬件设备实现了人体感测,垃圾分类识别和播报,垃圾桶的机械控制、远程定位,以及手机端APP信息交互等功能。使用该自动化程度高的智能分类垃圾桶可潜移默化地提高人们对垃圾进行正确分类的好习惯。
In developing or developed countries smart car parking is one of most accepted and rapid growing smart city result. Due to significant interest in smart car parking technology, various entities like shopping malls, tr...
详细信息
ISBN:
(纸本)9781538628423
In developing or developed countries smart car parking is one of most accepted and rapid growing smart city result. Due to significant interest in smart car parking technology, various entities like shopping malls, transporting stations and universities have begun to understand the significance of smart parking. The strength to connect, evaluate and automate data collected from devices, powered by and represented as the Internet of Things and that makes smart car parking achievable. This paper proposes an innovative algorithm that boosts the efficiency of present cloud based smart car parking system and establishes a network architecture based on the Internet of Things. This paper introduce a structure that helps users to find automatically a free car parking space by using user's Global Positioning System. These simulation study shows that the proposed algorithm helps to enhance the probability of successful car parking and reduces the users waiting time.
The ball and plate system, which has more than one variable, is a non-linear system. The stability of the ball and plate system can be performed when the ball is moved to any desired coordinates on the plate or to the...
详细信息
ISBN:
(纸本)9781538676417
The ball and plate system, which has more than one variable, is a non-linear system. The stability of the ball and plate system can be performed when the ball is moved to any desired coordinates on the plate or to the desired orbit. The degree of freedom of the ball and plate system is greater than the number of actuators that move the system. Therefore, the control of the system is a difficult problem. There is friction, measurement delays and unstable parameters that can affect the system control negatively. The designed physical model was implemented using arduino uno r3 development card by using PID, Sliding Mode Control (SMC) and Fuzzy Logic Control (FLC) methods through LabVIEW environment. For this aim, a user interface is created on the Labview program and a system design is implemented in which control parameters can be changed or different control algorithms can be tested.
In the many part of the word, availability of potable water is an issue as it is contaminated, there are basic qualitative observations that quickly determine if water is not safe to consume. To prevent the pollution,...
详细信息
ISBN:
(纸本)9781509048908
In the many part of the word, availability of potable water is an issue as it is contaminated, there are basic qualitative observations that quickly determine if water is not safe to consume. To prevent the pollution, first part is to detect that pollutant. This system is to develop, implement, monitor and control some parameter of water such as pH level, temperature, turbidity. In this system low cost sensors are used to control and monitor the parameters. arduinouno interface with LabVIEW.
暂无评论