检索结果-内蒙古大学图书馆

Advances in powder nano-photocatalysts as pollutant removal and as emerging contaminants in water:Analysis of pros and cons on health and environment

Advanced Powder Materials

引用

Advanced Powder materials 2024年第6期3卷 33-69页

作者： Sahil Thakur Abhijeet Ojha Sushil Kumar Kansal Navneet Kumar Gupta Hendrik C.Swart Junghyun Cho Andrej Kuznetsov Shuhui Sun Jai Prakash Department of Chemistry National Institute of Technology HamirpurHamirpur(H.P.)177005India Department of Materials Science and Engineering National Institute of Technology HamirpurHamirpur(H.P.)177005India Dr.S.S.Bhatnagar University Institute of Chemical Engineering and Technology Panjab UniversityChandigarh 160014India Center for Sustainable Technologies Indian Institute of Science(IISc)Gulmohar MargMathikereBengaluru 560012India Department of Physics University of the Free State(UFS)BloemfonteinZA 9300South Africa Department of Mechanical Engineering&Materials Science and Engineering Program State University of New York(SUNY)BinghamtonNY 13902-6000USA University of Oslo Department of Physics and Centre for Materials Science and NanotechnologyPO Box 1048 BlindernN-0316OsloNorway Institut National de la Recherche Scientifique(INRS)-CentreEnergie Materiaux et Telecommunications VarennesQuebec J3X 1P7Canada

Photocatalysis is an advanced oxidation process where light exposure triggers a semiconducting nanomaterial(nano-photocatalyst)to generate electron-hole(e^(-)/h^(+))pairs and free *** phenomenon is widely used for the photocatalysis-assisted removal of organic and other contaminants using wide range of nanophotocatalysts,offering an efficient approach to environmental ***,the introduction of powdered nano-photocatalysts into water systems often leads to unintended secondary pollution in the form of residual nano-photocatalysts,ion leaching,free radicals,toxic by-products *** practices potentially introduce emerging secondary contaminants into aquatic environments,posing risks to both aquatic life and human *** resulting chemical by-products and intermediates can effectively induce chronic toxicity,neurological and developmental disorders,cardiovascular defects,and intestinal ailments in humans and aquatic *** having a range of health and environmental consequences,this dark side of nano-photocatalysts has been comparatively less explored and discussed in the *** this review,the pros and cons of powder nanophotocatalysts are discussed in view of their advantages as well as disadvantages in wastewater *** discussion encompasses their classification based on composition,dimensions,structure,and activity,as well as recent advancements in improving their photocatalytic *** article also explores the recent advances on their applications in photocatalytic removal of various water pollutants/contaminants of emerging concern(i.e.,organic pollutants,micro/nano plastics,heavy ions,disinfections,etc.)Furthermore,an emphasis on the role of such nano-photocatalysts as emerging(secondary)contaminants in water system,along with a thorough discussion of latest studies related to the health and environmental issues,has been ***,it addresses critical issues in applying powder nano-photo

关键词： Powder nano-photocatalysts Advanced oxidation processes Wastewater treatment Pros and cons Emerging contaminants Health and environment issues

来源：评论

学校读者我要写书评

暂无评论

Optimising degradation and mechanical performance of additively manufactured biodegradable Fe–Mn scaffolds using design strategies based on triply periodic minimal surfaces

引用

Smart materials in Medicine 2024年第1期5卷 127-139页

作者： Dargusch, Matthew S. Soro, Nicolas Demir, Ali Gokhan Venezuela, Jeffrey Sun, Qiang Wang, Yuan Abdal-hay, Abdalla Alali, Aya Q. Ivanovski, Saso Previtali, Barbara Kent, Damon School of Mechanical and Mining Engineering The University of Queensland Advanced Engineering Building Bld 49 Staff House Rd St LuciaQLD4072 Australia Department of Mechanical Engineering Politecnico di Milano Via La Masa 1 Milan20156 Italy School of Dentistry The University of Queensland Herston Campus 4072 Australia Department of Engineering Materials and Mechanical Design Faculty of Engineering South Valley University Qena83523 Egypt Faculty of Industry and Energy Technology Mechatronics Technology Program New Cairo Technological University New Cairo - Fifth Settlement Cairo11835 Egypt School of Science Technology and Engineering University of the Sunshine Coast Maroochydore BCQLD4558 Australia

Additively manufactured lattices based on triply periodic minimal surfaces (TPMS) have attracted significant research interest from the medical industry due to their good mechanical and biomorphic properties. However, most studies have focussed on permanent metallic implants, while very little work has been undertaken on manufacturing biodegradable metal lattices. In this study, the mechanical properties and in vitro corrosion of selective laser melted Fe–35%Mn lattices based on gyroid, diamond and Schwarz primitive unit-cells were comprehensively evaluated to investigate the relationships between lattice type and implant performance. The gyroid-based lattices were the most readily processable scaffold design for controllable porosity and matching the CAD design. Mechanical properties were influenced by lattice geometry and pore volume. The Schwarz lattices were stronger and stiffer than other designs with the 42% porosity scaffold exhibiting the highest combination of strength and ductility, while diamond and gyroid based scaffolds had lower strength and stiffness and were more plastically compliant. The corrosion behaviour was strongly influenced by porosity, and moderately influenced by geometry and geometry-porosity interaction. At 60% porosity, the diamond lattice displayed the highest degradation rate due to an inherently high surface area-to-volume ratio. The biodegradable Fe–35Mn porous scaffolds showed a good cytocompatibility to primary human osteoblasts cells. Additive manufacturing of biodegradable Fe–Mn alloys employing TPMS lattice designs is a viable approach to optimise and customise the mechanical properties and degradation response of resorbable implants toward specific clinical applications for hard tissue orthopaedic repair. © 2023 The Authors

关键词： Porosity

来源：评论

学校读者我要写书评

暂无评论

Quaternary ammonium-functionalized polysilsesquioxanes for antifogging coating

RSC Applied Polymers

引用

RSC Applied Polymers 2024年第1期3卷 92-96页

作者： Hamada, Takashi Sugimoto, Tetsuya Tanaka, Arata Maeda, Tetsuya Katsura, Daiji Koga, Hiroyuki Ohshita, Joji Collaborative Research Laboratory Graduate School of Advanced Science and Engineering Hiroshima University 1-4-1 Kagamiyama Higashi-Hiroshima Hiroshima 739-8527 Japan Quantum Materials and Applications Research Center Takasaki Institute for Advanced Quantum Science National Institutes for Quantum Science and Technology (QST) 1233 Watanuki-machi Takasaki Gunma 370-1292 Japan Technical Research Center Mazda Motor Corporation Aki-gun Hiroshima 730-8670 Japan Smart Innovation Program Graduate School of Advanced Science and Engineering Hiroshima University 1-4-1 Kagamiyama Higashi-Hiroshima Hiroshima 739-8527 Japan Division of Materials Model-Based Research Digital Monozukuri (Manufacturing) Education and Research Center Hiroshima University 3-10-32 Kagamiyama Higashi-Hiroshima Hiroshima 739-0046 Japan

Aiming to develop antifogging materials with enhanced antifogging properties and scratch resistance, polysilsesquioxane films containing quaternary ammonium groups were prepared via a sol-gel reaction and quaternization. Owing to their high water uptake, scratch hardness, and transparency, the prepared quaternary ammonium-functionalized polysilsesquioxane films are promising for application in antifogging coatings. © 2025 RSC.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Nonsaturated large magnetoresistance and transport dynamics in a n-doped cryogenic WSe2 field-effect device

引用

Physical Review B 2025年第12期111卷 125307-125307页

作者： Wei-Chen Lin Ching-Chen Yeh Jia-Zhu Zou Nhat Anh Nguyen Phan Inayat Uddin Hai Yen Le Thi Kenji Watanabe Takashi Taniguchi Gil-Ho Kim Department of Engineering and System Science National Tsing Hua University Hsinchu 300 Taiwan Taiwan International Graduate Program Academia Sinica Taipei 115 Taiwan Department of Physics National Taiwan University Taipei 106 Taiwan Department of Electrical and Computer Engineering Sungkyunkwan University (SKKU) Suwon 164 Republic of Korea Sungkyunkwan Advanced Institute of Nano Technology (SAINT) Sungkyunkwan University (SKKU) Suwon 16419 Republic of Korea Research Center for Electronic and Optical Materials National Institute for Materials Science 1-1 Namiki Tsukuba 305-0044 Japan Research Center for Materials Nanoarchitectonics National Institute for Materials Science 1-1 Namiki Tsukuba 305-0044 Japan

Interest in the two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) continues to intensify, driven by their suitable band gaps to supplant silicon as next-generation semiconductor materials. Among various TMDs, tungsten diselenide (WSe2) is renowned for its superior electrical properties in carrier density and mobility under ambient conditions. Despite its notable attributes, the behavior of monolayer WSe2 in the electron-doped regime under cryogenic conditions remains largely uncharted, particularly concerning its magnetotransport properties. In this study, we reveal the transport mechanisms of monolayer WSe2 from high temperatures down to the cryogenic regime. As evident by Efros–Shklovskii variable-range hopping (E-S VRH) in the cryogenic regime, strong Coulomb interactions arise between electrons. Above 8 K, an uncommon nonsaturated quadratic large magnetoresistance (MR) can be explained by the wave-function shrinkage model, which is consistent with the E-S VRH transport mechanism. Notably, the nonsaturated quadratic large MR shows a magnitude up to 1.40% at 1. T. These findings underscore the potential applications for monolayer WSe2 in cryogenic field-effect devices, magnetic sensors, and memory devices and mark a significant advance in magnetotransport research.

关键词： Monolayers

来源：评论

学校读者我要写书评

暂无评论

Textured BaTiO3 nanorod arrays synthesized via hydrothermal method: Enhanced degradation of Rhodamine B with piezocatalysis

引用

Ceramics International 2025年

作者： Chiu, Yen-Lun Chang, Kao-Shuo Program on Key Materials Academy of Innovative Semiconductor and Sustainable Manufacturing National Cheng Kung University No.1 University Road Tainan City70101 Taiwan Department of Materials Science & Engineering National Cheng Kung University No.1 University Road Tainan City70101 Taiwan

This paper presents a hydrothermal method for fabricating textured BaTiO3 (BTO) nanorod arrays with high crystallinity on fluorine-doped tin oxide (FTO) substrates by applying a polarization treatment to the samples to explore the feasibility of enhancing their piezoelectric properties. The preparation of highly textured BTO nanorod arrays using a two-step hydrothermal process was investigated in detail, including the spin-coating process for depositing the TiO2 seed layer, the influence of solution acidity on the hydrothermal synthesis of TiO2 nanorod arrays, and the formation mechanism of textured BTO nanostructures. The piezoelectric constants (d33) of the samples were determined using piezoresponse force microscopy. S-BTO(P), which has high crystallinity and preferential orientation, achieves a d33 as high as 85.4 p.m./V after poling, which is 3.2 times higher than that without textured structures and poling. Our findings revealed that chemically controlling and inducing a preferential orientation in the crystal structure of piezoelectric materials with a seed layer and specific hydrothermal conditions can significantly enhance their piezoelectric properties after poling, making them excellent candidates for piezoelectric devices. Especially, this study confirms that the piezoelectric-enhanced charge separation in poled BTO nanorod arrays enables efficient generation of reactive species under ultrasonication, leading to effective degradation of RhB. The strong piezocatalytic performance highlights the material's potential for practical applications in environmental pollutant removal. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Piezoelectricity

来源：评论

学校读者我要写书评

暂无评论

Boosting Thermoelectric Performance in Nanocrystalline Ternary Skutterudite Thin Films through Metallic CoTe2 Integration

引用

ACS Applied materials and Interfaces 2024年第12期16卷 14770-14780页

作者： Jarwal, Bhawna Abbas, Suman Chou, Ta-Lei Vailyaveettil, Suneesh M. Kumar, Ashutosh Quadir, Shaham Ho, Thi-Thong Wong, Deniz P. Chen, Li-Chyong Chen, Kuei-Hsien Molecular Science and Technology Program Taiwan International Graduate Program Academia Sinica Taipei10617 Taiwan International Graduate Program of Molecular Science and Technology National Taiwan University Taipei10617 Taiwan Institute of Atomic and Molecular Sciences Academia Sinica Taipei10617 Taiwan Center for Condensed Matter Sciences National Taiwan University Taipei10617 Taiwan Department of Physics National Central University Taoyuan32001 Taiwan Department of Materials Science and Metallurgical Engineering Indian Institute of Technology Bhilai Chhattisgarh Durg491001 India GoldenCO80401 United States Helmholtz-Zentrum Berlin für Materialien und Energie Hahn-Meitner-Platz 1 BerlinD-14109 Germany Department of Physics National Taiwan University Taipei10617 Taiwan Center of Atomic Initiative for New Materials National Taiwan University Taipei10617 Taiwan

Metal-semiconductor nanocomposites have emerged as a viable strategy for concurrently tailoring both thermal and electronic transport properties of established thermoelectric materials, ultimately achieving synergistic performance. In this investigation, a series of nanocomposite thin films were synthesized, embedding metallic cobalt telluride (CoTe2) nanophase within the nanocrystalline ternary skutterudite (Co(Ge1.22Sb0.22)Te1.58 or CGST) matrix. Our approach harnessed composition fluctuation-induced phase separation and in situ growth during thermal annealing to seamlessly integrate the metallic phase. The distinctive band structures of both materials have developed an ohmic-type contact characteristic at the interface, which raised carrier density considerably yet negligibly affected the mobility counterpart, leading to a substantial improvement in electrical conductivity. The intricate balance in transport properties is further influenced by the metallic CoTe2 phase’s role in diminishing lattice thermal conductivity. The presence of the metallic phase instigates enhanced phonon scattering at the interface boundaries. Consequently, a 2-fold enhancement in the thermoelectric figure of merit (zT ∼ 1.30) is attained with CGST-7 wt. % CoTe2 nanocomposite film at 655 K compared to that of pristine CGST. © 2024 The Authors. Published by American Chemical Society.

关键词： Nanocomposites

来源：评论

学校读者我要写书评

暂无评论

Sensitivity improvement of Au-nanoparticle-based colorimetric probes via surface decoration of carbon quantum dots

引用

New Journal of Chemistry 2024年第22期48卷 10053-10059页

作者： Li, Yi-Ting Lo, Chien Feng Lin, Kuan-Han Liao, Pin-Chao Juan, Joon Ching Hsiao, Po-Hsuan Chen, Chia-Yun Department of Materials Science and Engineering National Cheng-Kung University Tainan 70101 Taiwan Program on Semiconductor Packaging and Testing Academy of Innovative Semiconductor and Sustainable Manufacturing National Cheng Kung University Tainan 70101 Taiwan Nanotechnology & Catalysis Research Centre Institute for Advanced Studies University of Malaya Kuala Lumpur 50603 Malaysia Hierarchical Green-Energy Materials (Hi-GEM) Research Center National Cheng Kung University No. 1 University Road Tainan 70101 Taiwan

Visually colorimetric sensing of hazardous metallic ions based on gold nanoparticles (AuNPs) has been considered a facile, on-site, and reliable monitoring route, yet the improvement of detection limit, as well as environmental pH tolerance, is still needed. Herein, we present an integrated probe design based on functionalizing AuNP cores with carbon quantum dots (CQD) as colorimetric probes for tracing Cu²⁺ ions with a limit of detection as low as 1..7 nM. Improved detection selectivity was elucidated with the reduction in thiol groups bound between CQD decorations and AuNP probes initiated by oxidation of Cu²⁺ ion analytes, thus separating crossly connected probes, depending on tracing Cu²⁺ concentrations. Moreover, distributed CQDs with negative potentials allowed the stabilization of dispersed AuNPs against re-aggregation, which caused the gradual morphological transition from aggregated features to dispersed states in microscopic view, and eventually, reflected the gradual color change from red to purple-red. The correlated practicality of colorimetric detection of the Cu²⁺ ion was further validated with sound-sensing selectivity, environmental pH resistance and tests on real samples. © 2024 The Royal Society of Chemistry

关键词：

来源：评论

学校读者我要写书评

暂无评论

Challenges in Developing MOF-Based Membranes for Gas Separation

引用

Langmuir 2023年第8期39卷 2871-2880页

作者： Kang, Dun-Yen Lee, Jong Suk Department of Chemical Engineering National Taiwan University No. 1 Sec. 4 Roosevelt Road Taipei10617 Taiwan International Graduate Program of Molecular Science and Technology National Taiwan University No. 1 Sec. 4 Roosevelt Road Taipei10617 Taiwan Center of Atomic Initiative for New Materials National Taiwan University No. 1 Sec. 4 Roosevelt Road Taipei10617 Taiwan Department of Chemical and Biomolecular Engineering Sogang University Baekbeom-ro 35 Seoul4107 Korea Republic of Institute of Emergent Materials Sogang University 35 Baekbeom-ro Seoul4107 Korea Republic of

Metal-organic frameworks (MOFs) are promising candidates for membrane gas separation. MOF-based membranes include pure MOF membranes and MOF-based mixed matrix membranes (MMMs). This Perspective discusses the challenges for the next stage of the development of MOF-based membranes based on research conducted in the past decade. We focused on three major issues associated with pure MOF membranes. First, some MOF compounds have been overstudied, despite the availability of numerous MOFs. Second, gas adsorption and diffusion in MOFs are often independently investigated. The correlation between adsorption and diffusion has seldom been discussed. Third, we identify the importance of characterizing the gas distribution in MOFs to understand the structure-property relationships for gas adsorption and diffusion in MOF membranes. For MOF-based MMMs, engineering the MOF-polymer interface is essential for achieving the desired separation performance. Various approaches to modify the MOF surface or polymer molecular structure have been proposed to improve the MOF-polymer interface. Herein, we present defect engineering as a facile and efficient approach for engineering the MOF-polymer interfacial morphology and its extended application for various gas separations. © 2023 American Chemical Society.

关键词： Organometallics

来源：评论

学校读者我要写书评

暂无评论

Surfactant-assisted formation of robust p-Ag2O – n-BaTiO3 heterojunctions for visible-light photocatalytic applications

引用

Applied Surface science 2024年 655卷

This paper reports the use of microwave-assisted hydrothermal and precipitation approaches to prepare a composite from a polyethylene glycol (PEG − 1.000) surfactant-assisted dispersion of p-Ag2O particles in conjunction with n-BaTiO3 (n-BTO) for use in visible-light photocatalytic applications. The conductivities of p-Ag2O and n-BTO were determined through Mott–Schottky measurements and verified using energy band diagrams. Various PEG − 1.000-treated and untreated (1.− x)BTO − xAg2O (x ≈ 57.0, 63.0, and 75.0 mol%, determined using Rietveld refinement) composites were prepared. X-ray photoelectron spectroscopy was used to determine the valence states and binding energies of the constituent elements in the various composites. Scanning electron microscopy, transmission electron microscopy, and particle-size distribution measurements revealed that Ag2O is excellently dispersed in the PEG − 1.000-treated composite, which exhibited a remarkable surface area (≈1. m2⋅g−1. and pore volume (≈0.05 cm3⋅g−1. at x ≈ 63.0 mol%. All composites exhibited effective and reliable visible-light energy-harvesting capabilities. The PEG − 1.000-treated composite (x ≈ 63.0 mol%) exhibited the most promising rhodamine B photodegradability, attributable to the formation of abundant p − n junctions and the effective absorption of visible light. An energy-band diagram was constructed to elucidate the potential mechanism responsible for this remarkable activity. Under visible light, our samples outperformed other similar and representative literature-reported samples under solar light. © 2024 Elsevier B.V.

关键词： Heterojunctions

来源：评论

学校读者我要写书评

暂无评论

Thermodynamic and Environmental Assessment of Low-GWP Alternative Refrigerants for Domestic Cooling

引用

Journal of The Institution of Engineers (India): Series C 2023年第2期104卷 377-383页

作者： Islam, Md. Amirul Rupam, Tahmid Hasan Hosan, Shahadat Saha, Bidyut Baran Institute for Materials Chemistry and Engineering Kyushu University Kasuga-Koen 6-1 Kasuga-Shi Fukuoka816-8580 Japan Department of Electrical and Electronics Engineering Bangabandhu Sheikh Mujibur Rahman Science and Technology University Gopalganj8100 Bangladesh Kyushu University 744 Motooka Nishi-Ku Fukuoka819-0395 Japan Kyushu University Program for Leading Graduate School Green Asia Education Center Kyushu University Fukuoka Japan Department of Mechanical Engineering Kyushu University 744 Motooka Nishi-Ku Fukuoka819-0395 Japan

Nearly two billion air-conditioning (AC) units are currently being used for space cooling worldwide. The majority of these ACs use R1.4a as the working fluid, a greenhouse gas (GHG) with a global warming potential (GWP) of 1.00 kg-CO2-eq. According to the rules set by the world environment safety organizations, the GWP of domestic air-conditioning systems must not exceed 750 kg-CO2-eq. Hence, the R1.4a must be phased out by 2025, and an alternative refrigerant with similar thermodynamic properties yet low GWP is required. Therefore, the authors have investigated several potential binary/ternary refrigerant blends in this study. Among the studied refrigerants, R445A, R30A, and NPB2 (newly proposed blend: 8% R1.2a + 92% R1.34yf) can reduce 90–99% global warming impact (more than 200 million tonnes of CO2 emission equivalent) caused by the domestic air-conditioning systems every year. © 2023, The Institution of Engineers (India).

关键词： Refrigerants

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：