检索结果-内蒙古大学图书馆

Offsets Reconstruction Method for Clock Skew Measurement Over High-Jitter Communication

SN Computer Science 2025年第5期6卷 1-14页

作者： Sastra, Nyoman Putra Saputra, Komang Oka Teng, Wei-Chung Study Program of Electrical Engineering Faculty of Engineering Udayana University Jalan Raya Kampus Bukit Jimbaran Bali Badung 80361 Indonesia Department of Computer Science and Information Engineering National Taiwan University of Science and Technology No. 43 Section 4 Keelung Rd Taipei 106 China

Measuring clock skew of devices over a network fully relies on the offsets, the differences between sending and receiving times. Offsets that shape a thick line are the most ideal one as their slope is directly the clock skew sought. When some outliers separate from the thick line due to higher delay jitter, current advanced approaches use the lower bound or the majority of offsets to derive accurate clock skew. However, outliers in offsets that shape parallel dotted lines, reduce the availability of offsets in the lower region, and scatter widely the offsets from their majority zone. These conditions drive the current skew estimation approaches to lose their accuracy. This paper then developed a new method, which reconstructs back the outliers into their origin positions, in order to provide ideal offsets for clock skew measurement. The experimental evaluations have demonstrated that the clock skew accuracy of dotted-lines offsets tampered by outliers was improved from 2.1 to 0.9 ppm by the proposed reconstruction method. For a broader purpose, the reconstruction method has been adjusted to be implemented also on non-dotted-lines offsets. The robustness of the proposed method for this case has also been exhibited by the very ideal reconstructed offsets that shape like a thick line. © The Author(s) 2025.

关键词： Clock skew Delay jitter Dotted lines Hough transform

来源：评论

学校读者我要写书评

暂无评论

Machine Learning-Based Prediction of Corrosion Inhibition Efficiency of Expired Pharmaceuticals: Model Development and Application

引用

Journal of Bio- and Tribo-Corrosion 2025年第1期11卷 1-12页

作者： Putra, Dzaki Asari Surya Ardyansyah, Nibras Bahy Putranto, Nicholaus Verdhy Trisnapradika, Gustina Alfa Akrom, Muhamad Rustad, Supriadi Dipojono, Hermawan Kresno Maezono, Ryo Faculty of Computer Science Study Program in Informatics Engineering Universitas Dian Nuswantoro Semarang50131 Indonesia Research Center for Materials Informatics Faculty of Computer Science Universitas Dian Nuswantoro Semarang50131 Indonesia Quantum and Nano Technologies Research Group Faculty of Industrial Technology Institut Teknologi Bandung Bandung40132 Indonesia School of Information Science Japan Advanced Institute of Science and Technology Ishikawa923-1292 Japan

Corrosion poses a significant challenge in industries due to material degradation and high maintenance costs, making effective inhibitors essential. Recent studies suggest expired pharmaceuticals as alternative corrosion inhibitors, but identifying the most efficient compounds can be time-consuming. This study applies machine learning models, particularly Gradient Boosting Regressor (GBR), to predict corrosion inhibition efficiency (CIE). The developed model is integrated into a web-based application, enabling real-time, accurate CIE predictions. Results show GBR as the more precise model for predicting CIE, with low error rates. The streamlit-based web application offers a user-friendly platform, facilitating quick identification of suitable inhibitors. It is flexible, supporting analysis beyond corrosion inhibitors, and significantly enhances the efficiency of the evaluation process. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2025.

关键词： Adversarial machine learning

来源：评论

学校读者我要写书评

暂无评论

A Design study on Integrated Complex Coefficient Filters with Peripheral Circuits for Accurate Frequency Response Measurement

IEEJ Transactions on Electronics, Information and Systems

引用

IEEJ Transactions on Electronics, information and systems 2025年第1期145卷 16-24页

作者： Shouno, Kazuhiro Sato, Lina Fukagawa, Kanta Tanimoto, Hiroshi Muto, Cosy Division of Information Engineering University of Tsukuba 1-1-1 Tennoudai Ibaraki Tsukuba305-8573 Japan Graduate School of Science and Technology Degree Programs in Systems and Information Engineering Master’s Program in Computer Science University of Tsukuba Japan Kitami Institute of Technology 165 Koen-cho Hokkaido Kitami090-8507 Japan Faculty of Education Nagasaki University 1-14 Bunkyo-machi Nagasaki852-8521 Japan

This paper proposes a measurement technique for an integrated complex filter. The proposed method is based on two measurement methods with integrated circuitry for calibration. It is accomplished by applying square waves to an FUT (Filter Under Test) instead of sinusoidal waves or by superposing transfer characteristics obtained by applying a single sinusoidal wave to an FUT. In both of the above methods, the output signal connected to the external measurement equipment via a 50 Ω coaxial cable and so on. In this case, the output signal of the FUT should be amplified by internal or external amplifiers, which degrades the response. However, it is cancelled out by the proposed calibration circuitry with some analog switches. In addition to the above, for the RC polyphase filter, the source resistance and the load capacitance degrade the measurement results and their effect is discussed. The validity of the proposal is confirmed through computer simulation for a third-order RCPF whose passband is 8–40 MHz fabricated by Phenitec 0.6 µm CMOS process. It is shown that the measurement error is −1.10 dB for the square-wave method and −1.00 dB and −0.43 degrees for the superposition method at 40 MHz. © 2025 The Institute of Electrical Engineers of Japan.

关键词： Capacitance

来源：评论

学校读者我要写书评

暂无评论

Classification Of Ornamental Fish Types Using CNN Method With VGG-16 And U-NET Architecture

Classification Of Ornamental Fish Types Using CNN Method Wit...

引用

Consumer Technology (ICCT-Pacific), International Conference on

作者： Ni Luh Wiwik Sri Rahayu Ginantra Christina Purnama Yati I Gusti Ayu Agung Diatri Indradewi I Komang Agus Yudiawan Technology and Informatics Informatics Engineering Institut Bisnis dan Teknologi Indonesia (INSTIKI) Denpasar Indonesia Department of Informatics Engineering Information Systems Study Program Faculty of Engineering and Vocational Studies Universitas Pendidikan Ganesha (UNDIKSHA) Denpasar Indonesia

ISBN: (数字)9798331504120

ISBN: (纸本)9798331504137

Ornamental fish are a type of fish that live in freshwater or seawater habitats and are typically maintained for aesthetic purposes, often in ornamental ponds or as household pets. The diversity of colors, shapes, and patterns observed in ornamental fish presents a challenge in their classification. Therefore, a method capable of accurately recognizing the visual characteristics of these fish is required. The objective of this study is to evaluate the performance of two Convolutional Neural Network (CNN) architectures, specifically VGG-16 and U-Net, using five distinct types of ornamental fish, namely Angel Fish, Betta Fish, Clown Fish, Gold Fish, and Guppy Fish. The dataset comprises 3.240 images that have been processed using TensorFlow and Keras on Google Collaboratory. The results demonstrated that U-Net demonstrated superior performance in segmentation, with an Average Intersection over Union (IoU) of 58.91 % and an Average Dice Coefficient of 73.72%. In contrast, VGG-16 exhibited signs of overfitting, as evidenced by lower evaluation metrics. To enhance the efficacy of the transfer learning model, further optimization is recommended.

关键词： Measurement Image segmentation Visualization Shape Transfer learning Fish Internet Convolutional neural networks Optimization Overfitting

来源：评论

学校读者我要写书评

暂无评论

Analysis Geomorphic Flood Index in Determining Flood-Prone Areas in East Kalimantan Province, Indonesia

Analysis Geomorphic Flood Index in Determining Flood-Prone A...

引用

2024 Annual Conference, ASPRS 2024

作者： Virtriana, Riantini Amalia, Annisa Fitri Ihsan, Kalingga Titon Nur Anggraini, Tania Septi Harto, Agung Budi Deliar, Albertus Geospatial Information Science and Technology Research Group Faculty of Earth Science and Technology Bandung Institute of Technology Bandung40132 Indonesia Center for Remote Sensing Bandung Institute of Technology Bandung40132 Indonesia Geodesy and Geomatic Engineering Faculty of Earth Sciences and Technology Bandung40132 Indonesia Doctor Program in Program Study of Geodesy and Geomatic Engineering Faculty of Earth Sciences and Technology Bandung40132 Indonesia Universitas Pendidikan Indonesia Bandung40111 Indonesia Center for Spatial Data Infrastructure Bandung Institute of Technology Bandung40132 Indonesia

In 2022, there are 1,524 flood events out of a total of 3,531 disasters occurring in Indonesia. East Kalimantan Province ranked 20th among the 35 provinces in Indonesia with 28 flood occurrences in 2022, resulting in two fatalities. This highlights the urgent need for addressing flood hazard to prevent future casualties. There are some methods that can be used to determine the flood hazard in a region. In this research aims to identify flood-prone areas in East Kalimantan Province and evaluate the effectiveness of different mapping methods. The methodology that compares are the Pairwise Comparison method and Geomorphic Flood Index (GFI). The study's results provide flood-prone area maps of East Kalimantan Province using both methods, recommend the more efficient method for flood-prone area identification, and offer mitigation strategies based on the findings. This research is intended to serve as a reference for selecting the best method for identifying flood-prone areas and for informing policy decisions to mitigate flood impacts in East Kalimantan Province. © Author(s) 2025.

关键词： Hazards

来源：评论

学校读者我要写书评

暂无评论

Performance Evaluation of Multi-ONU Customers Access Network using Spectrum Slicing and Duplication Techniques 5

Performance Evaluation of Multi-ONU Customers Access Network...

引用

5th International Conference on Emerging Electrical Energy, Electronics and Computing Technologies, ICE4CT 2024

作者： Rahman, Juwairiyyah Abdul Mugunthan, Sivaguru A.L. Hassan, Hasliza Abu Muslim, Norliana Ab-Rahman, Mohammad Syuhaimi Department of Electrical Engineering Faculty of Engineering and Life Sciences Universiti Selangor Selangor Bestari Jaya45600 Malaysia Department of Computer and Communication Technology Faculty of Information and Communication Technology Universiti Tunku Abdul Rahman Perak Kampar31900 Malaysia Department of Electrical Electronics and Systems Engineering Faculty of Engineering and Built Environment Universiti Kebangsaan Malaysia Malaysia Electrical and Computer Engineering Program Faculty of Engineering Sohar University PC:311 Sohar Oman

This study aims to increase the number of access users by limiting the sample size to 30 users while ensuring that every Optical Network Unit (ONU) receives data from the Optical Line Terminal (OLT). The proposed solution allows for the determination of power requirements at each ONU based on bus-star topologies, facilitating an increase in user capacity. The power received by each ONU is a critical parameter that system designers must consider when planning the implementation of Fiber to the Home (FTTH), as it impacts the output data in terms of Bit Error Rate (BER) and Signal Quality Factor (QF) for each user. Various parameters were evaluated to ensure that the enhanced network improves scalability while adhering to standard specifications. These parameters included the Q-factor, BER, eye diagram, user count, and received power. The study employed slicing and duplication techniques, utilizing Arrayed Waveguide Grating (AWG) for signal duplication and Wavelength Division Multiplexing for signal slicing. The simulations were conducted using a transmitter operating at a frequency of 1491 nm with a power output of 0 dBm, utilizing the latest version of OptiSystem 20 software. The results highlighted the system's capability to support a total of 73,728 users, meeting stringent performance criteria. Specifically, the system achieved a Q-factor greater than 6, indicating high signal quality, and a bit error rate (BER) lower than 1 × 10-9, ensuring reliable data transmission. For the sampled 30 users, the average Q factor was 8.1527, and the average BER was 5.3648 × 10^-11, with an output power level of -54.278 dBm. Despite an increase in users, the quality of the data supplied to clients remained unchanged. These outcomes underscore the robustness and efficiency of the design in delivering high-capacity, error-resilient optical communication. © 2025 Institute of Physics Publishing. All rights reserved.

关键词： Q factor measurement

来源：评论

学校读者我要写书评

暂无评论

Machine Learning Stroke Prediction in Smart Healthcare:Integrating Fuzzy K-Nearest Neighbor and Artificial Neural Networks with Feature Selection Techniques

引用

Computers, Materials & Continua 2025年第3期82卷 5115-5134页

作者： Abdul Ahad Ira Puspitasari Jiangbin Zheng Shamsher Ullah Farhan Ullah Sheikh Tahir Bakhsh Ivan Miguel Pires Department Information System Study Program Faculty of Science and TechnologyUniversitas AirlanggaSurabaya60286Indonesia School of Software Northwestern Polytechnical UniversityXi’an710072China Research Center for Quantum Engineering Design Faculty of Science and TechnologyUniversitas AirlanggaSurabaya60286Indonesia School of Computer Science and Software Engineering Shenzhen UniversityShenzhen518061China Cybersecurity Center Prince Mohammad Bin Fahd University617Al JawharahKhobarDhahran34754Saudi Arabia Cardiff School of Technologies Cardiff Metropolitan UniversityWestern AvenueCardiffCF52YBUK Instituto de Telecomunicacoes Escola Superior de Tecnologia e Gestao de AguedaUniversidade de Aveiroágueda3750-127Portugal

This research explores the use of Fuzzy K-Nearest Neighbor(F-KNN)and Artificial Neural Networks(ANN)for predicting heart stroke incidents,focusing on the impact of feature selection methods,specifically Chi-Square and Best First Search(BFS).The study demonstrates that BFS significantly enhances the performance of both *** BFS preprocessing,the ANN model achieved an impressive accuracy of 97.5%,precision and recall of 97.5%,and an Receiver Operating Characteristics(ROC)area of 97.9%,outperforming the Chi-Square-based ANN,which recorded an accuracy of 91.4%.Similarly,the F-KNN model with BFS achieved an accuracy of 96.3%,precision and recall of 96.3%,and a Receiver Operating Characteristics(ROC)area of 96.2%,surpassing the performance of the Chi-Square F-KNN model,which showed an accuracy of 95%.These results highlight that BFS improves the ability to select the most relevant features,contributing to more reliable and accurate stroke *** findings underscore the importance of using advanced feature selection methods like BFS to enhance the performance of machine learning models in healthcare applications,leading to better stroke risk management and improved patient outcomes.

关键词： Fuzzy K-nearest neighbor artificial neural network accuracy precision recall F-measure Chi-Square best search first heart stroke

来源：评论

学校读者我要写书评

暂无评论

Implementation and Evaluation of 0.6 µm CMOS Complex RCPF for Accurate Frequency Response Measurement

IEEJ Transactions on Electronics, Information and Systems

引用

IEEJ Transactions on Electronics, information and systems 2025年第1期145卷 25-37页

作者： Sato, Lina Fukagawa, Kanta Shouno, Kazuhiro Tanimoto, Hiroshi Muto, Cosy Moriyama, Seijiro Takahashi, Chikau Yoshino, Michitaka Graduate School of Science and Technology Degree Programs in Systems and Information Engineering Master’s Program in Computer Science University of Tsukuba Japan Division of Information Engineering University of Tsukuba 1-1-1 Tennoudai Ibaraki Tsukuba305-8573 Japan Kitami Institute of Technology 165 Koen-cho Hokkaido Kitami090-8507 Japan Faculty of Education Nagasaki University 1-14 Bunkyo-machi Nagasaki852-8521 Japan Anagix Corporation 3-22-27 Numama Kanagawa Zushi249-0004 Japan Takamori Corporation Japan Research Center for Micro-Nano Technology Hosei University 3-11-15 Midori-cho Koganei Tokyo184-0003 Japan

This paper describes the implementation and evaluation of an RC polyphase filter (RCPF) and circuitry for measuring its frequency characteristics. The integrated circuit is fabricated on a 0.6 µm CMOS process and its supply voltage is 5 V. The integrated circuit includes a filter under test (FUT), a four-phase square wave generator, several analog switches and differential amplifiers to amplify the high-impedance signals of the RCPF. This FUT is a third-order complex RCPF whose passband is 8 − 40 MHz. This paper describes the design of these circuits in detail. This integrated circuit can select two measurement methods by means of external control signals. The first method uses a four-phase square wave. The frequency characteristics are measured by using an on-chip four-phase square wave generator driven by an external clock generator and by a spectrum analyzer tuned to the fundamental frequency. The second method uses an external network analyzer. Furthermore, this integrated circuit is equipped with a calibration circuit to measure the frequency characteristics of the circuitry except FUT by passing through the input / output signals of the FUT. As a result, the frequency characteristics of the FUT itself can be accurately measured. The effectiveness is confirmed through evaluation of the fabricated integrated circuit. © 2025 The Institute of Electrical Engineers of Japan.

关键词： Differential amplifiers

来源：评论

学校读者我要写书评

暂无评论

Design of Dual Space Inquiry framework for facilitating flexible learning in digital technology era

引用

International Journal of Educational Research Open 2025年 8卷

作者： Novitra, Fuja Abdullah, Mohd Nor Syahrir Özdemir, Erdogan Riyasni, Selma Emiliannur Festiyed Metra, Pol Department of Physics Faculty of Mathematics and Natural Science Universitas Negeri Padang Indonesia Department of Mathematics and Science Education Faculty of Education University of Malaya Malaysia Vocational School of Health Services Sivas Cumhuriyet University Turkey Information Systems Study Program Faculty of Science and Technology UIN Sulthan Thaha Saifuddin Jambi Indonesia

Mixed learning that offers flexibility is a current requirement. However, the challenge lies in ensuring that these approaches effectively accommodate interactive and practical elements, especially in physics education. This research aims to design a conceptual framework of the Dual Space Inquiry for facilitating flexible learning in basic physics course. An educational design research (EDR) approach was used to develop and validate the Dual Space Inquiry framework comprising three phases: analysis and exploration;design and construction;and evaluation and reflection. This research involved 253 students and 20 experts and practitioners. The findings highlighted the urgency of implementing a mixed learning framework that combines face-to-face and online learning methods in physics education contexts to optimize learning outcomes. These results became the basis for the design of the Dual Space Inquiry Framework which emphasizes flexibility, humanism, and student-centered. Furthermore, the results of expert and practitioner judgment showed that the framework's validity is in the high category (v-values=0.770). Based on the results, it is concluded that an approach that combines online and offline learning with inquiry activities integration in a balanced manner is recommended for optimal learning outcomes for physics education. The Dual Space Inquiry Framework, with its high validity, is a valuable framework for lecturers in physics and other science fields to enhance learning quality and adapt to the digital technology era. © 2024 The Author(s)

关键词： Digital pedagogy Framework ICT Inquiry Teaching strategies

来源：评论

学校读者我要写书评

暂无评论

Supply Chain Sustainability in Disruption: SC Intelligence, Customer Knowledge Transfer, and the Mediating Role of IS/IT

引用

IEEE engineering Management Review 2025年

作者： Ratna, Silvia Saide, Saide Rater, Salya Svyazhanovna, Baizakova Saule Herzavina, Herzavina Faculty of Information Technology Department of Informatics Engineering and Department of Information Systems Banjarmasin Indonesia State Islamic University of Sultan Syarif Kasim Riau Universitas Islam Negeri Sultan Syarif Kasim Riau-UIN SUSKA Riau Department of Information Systems Faculty of Science and Technology Indonesia PRO Knowledge Indonesia Pekanbaru Indonesia Universitas Pahlawan Tuanku Tambusai Indonesia Lembaga Enreach UIN Suska Riau Indonesia Politeknik Aceh Selatan Department of Informatics Engineering Aceh Indonesia Information Communication Technologies Robotics in Arkalyk Pedagogical Institute Master of Natural Sciences Educational Program for the Informatics Computer Science Kazakhstan Universitas Pahlawan Tuanku Tambusai Department of Informatics Engineering Indonesia National Taiwan University of Science and Technology Taiwan

Knowledge resource and information system/technology (IS/IT) capability have been considered to improve firm performance, however there is still a gap regarding the sustainability of supply chain to face and recover from disruption (e.g., COVID-19). Questionnaire-based surveys was adopted and received feedback from sixty (160) Indonesian companies or about 28.07% of response rate. © 1973-2011 IEEE.

关键词： customer knowledge transfer disruption information system/technology (IS/IT) responding knowledge management resource-based view (RBV) Supply chain (SC) sustainability supply chain knowledge transfer

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：