检索结果-内蒙古大学图书馆

Improvement of Mechanical Properties and Wall Thickness Uniformity of Hollow Ceramic Spheres by Biaxial Rotation Slurry Injection technology

引用

Journal of Wuhan University of technology(materials Science) 2025年第3期 619-626页

作者：王秋阳周建 LIU Guizhen WANG Lin DING Zhongjun State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology National Deep Sea Center

Ceramic hollow spheres have great potential for deep-sea ***,the irregularity of the conventional molding process,among other reasons,results in low wall thickness uniformity of hollow *** solve this problem,in this work,we developed a biaxial rotation grouting process for deep-sea ceramic hollow buoyancy spheres,which improves the drawbacks of the traditional rotary grouting method that results in poor wall thickness uniformity of the hollow spheres due to its irregular rotational *** this paper,an experimental study was carried out to investigate the effects of different rotational methods,rotational speeds,rotational time,solid phase content,*** the wall thickness uniformity of ceramic hollow *** results show that the hollow floating balls prepared by the biaxial rotation method have the lowest wall thickness standard deviation (0.04) when the rotation speed is 60 rpm,the molding time is 8 min,and the solid phase content is 70 wt%.After the hydrostatic pressure test of 120 MPa,the hydrostatic compressive strength of hollow spheres prepared by the biaxial rotation method was increased by 31.67% compared with that of the traditional process.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Crystallization Modulation and Holistic Passivation Enables Efficient Two‑Terminal Perovskite/CuIn(Ga)Se_(2)Tandem Solar Cells

引用

Nano-Micro Letters 2025年第1期17卷 205-215页

作者： Cong Geng Kuanxiang Zhang Changhua Wang Chung Hsien Wu Jiwen Jiang Fei Long Liyuan Han Qifeng Han Yi‑Bing Cheng Yong Peng State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070People’s Republic of China Triumph Photovoltaic Materials Co. Ltd.No.1001 Yannan AvenueHigh‑Tech Development DistrictBengbuAnhui 233000People’s Republic of China College of Materials Science and Engineering Guilin University of TechnologyGuilin 541004People’s Republic of China State Key Laboratory of Metal Matrix Composites Shanghai Jiao Tong UniversityShanghai 200240People’s Republic of China

Two-terminal(2-T)perovskite(PVK)/CuIn(Ga)Se_(2)(CIGS)tandem solar cells(TSCs)have been considered as an ideal tandem cell because of their best bandgap matching regarding to Shockley–Queisser(S–Q)***,the nature of the irregular rough morphology of commercial CIGS prevents people from improving tandem device *** this paper,D-homoserine lactone hydrochloride is proven to improve coverage of PVK materials on irregular rough CIGS surfaces and also passivate bulk defects by modulating the growth of PVK *** addition,the minority carriers near the PVK/C60 interface and the incompletely passivated trap states caused interface recombination.A surface reconstruction with 2-thiopheneethylammonium iodide and N,N-dimethylformamide assisted passivates the defect sites located at the surface and grain ***,LiF is used to create this field effect,repelling hole carriers away from the PVK and C60 interface and thus reducing *** a result,a 2-T PVK/CIGS tandem yielded a power conversion efficiency of 24.6%(0.16 cm^(2)),one of the highest results for 2-T PVK/CIGS TSCs to our *** validation underscores the potential of our methodology in achieving superior performance in PVK/CIGS tandem solar cells.

关键词： PVK/CIGS TSCs Irregular rough surfaces Modulating the growth PVK/C60 interface recombination

来源：评论

学校读者我要写书评

暂无评论

The difference in anti-corrosion effect between the addition of La and Ce of a B10 alloy

引用

Journal of materials Research and technology 2025年 36卷 8062-8074页

作者： Peiyou Du Tianyu Chen Guoliang Xie Qiaoqiao Wang Xinhua Liu State Key Laboratory for Advanced Metals and Materials University of Science and Technology Beijing No. 30 Xueyuan Road Beijing 100083 China Key Laboratory for Advanced Materials Processing of Ministry of Education Institute of Advanced Materials and Technology University of Science and Technology Beijing Beijing 100083 China Institute of Materials Genome Engineering Henan Academy of Sciences Zhengzhou 450046 China

Microalloying with rare earth elements is an effective method to improve the corrosion resistance of Cu–Ni alloys. The study of the effect of different rare earth elements on the corrosion resistance and corrosion behavior is significant for the optimization of Cu–Ni alloy composition. In this paper, the effect of La and Ce on the corrosion behavior of B10 alloy in 3.5 wt% NaCl solution was investigated separately, utilizing both electrochemical techniques and surface characterization methods. The results indicate that B10-0.1 wt% La alloy and B10-0.1 wt% Ce alloy have better corrosion resistance performance compared to Cu–10Ni alloy in NaCl solution. The better corrosion resistance performance of the B10-0.1 wt% La and B10-0.1 wt% Ce alloy could be mainly attributed to the preferential deposition of rare-earth oxides that promotes heterogeneous nucleation of the passive film. Furthermore, the deposition degree of La 2 O 3 is greater than that of Ce 2 O 3 during the early stage of immersion which leads to the superior corrosion resistance of the B10-0.1 wt% La alloy.

关键词： B10 alloy Rare earth elements Passivation film Corrosion resistance

来源：评论

学校读者我要写书评

暂无评论

Boosting Ion Conduction and Moisture Stability Through Zn2+ Substitution of Chloride Electrolytes for All-Solid-state Lithium Batteries

引用

advanced Energy materials 2025年第0期

作者： Lei, Peng Wu, Gang Liu, Hong Qi, Xiang Wu, Meng Li, Dabing Li, Yang Gao, Lei Nan, Ce-Wen Fan, Li-Zhen Beijing Key Laboratory for Advanced Energy Materials and Technologies Institute of Advanced Materials and Technology University of Science and Technology Beijing Beijing100083 China State Key Laboratory of New Ceramics and Fine Processing School of Materials Science and Engineering Tsinghua University Beijing100084 China

The recently emerged chloride solid electrolytes have garnered significant attention due to their superior ionic conductivity, wide electrochemical stability window, and exceptional compatibility with high-voltage oxide cathodes. Nevertheless, the currently cost-effective Zr-based chloride solid electrolytes face significant challenges, including low ionic conductivity and poor moisture stability. Herein, a versatile Zn2+-doped Zr-based chloride electrolyte is presented, designed to meet the aforementioned requirements. The optimized Li2.4Zr0.8Zn0.2Cl6 exhibits an improved ionic conductivity of 1.13 mS cm−1 at 30 °C. Simultaneously, the Li2.4Zr0.8Zn0.2Cl6 also demonstrates impressive moisture stability, maintaining its structural integrity after exposure to humid air. The mechanism underlying the enhanced moisture stability of Li2.4Zr0.8Zn0.2Cl6 is further elucidated by density functional theory calculations. Most notably, whether coupled with LiCoO2 or LiNi0.8Mn0.1Co0.1O2 cathodes, Li2.4Zr0.8Zn0.2Cl6-based all-solid-state batteries demonstrate exceptional cycling stability and rate performance. This high ionic conduction and moisture-resistant chloride electrolyte holds great promise for significantly advancing the commercialization of all-solid-state lithium batteries. © 2025 Wiley-VCH GmbH.

关键词： Solid-state Batteries

来源：评论

学校读者我要写书评

暂无评论

Solid-state stepwise temperature-programmable synthesis of bioinspired Fe-N-C oxygen reduction electrocatalyst featuring Fe-N_(5)configuration

引用

Nano Research 2025年第3期18卷 654-665页

作者： Wei Sang Somboon Chaemchuen Longyang Zhang Zechen Wang Xingchuan Li Cocoro Andrew Nagasaka Mo Xiong Naoki Ogiwara Cheng Chen Zhao Wang Jian Zhang Francis Verpoort Shichun Mu Zongkui Kou Tingting Wang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Basic Science School of Arts and SciencesThe University of TokyoKomabaMeguro-kuTokyo 153-8902Japan MOE Key Laboratory for Non-Equilibrium Synthesis and Modulation of Condensed Matter School of PhysicsXi’an Jiao tong UniversityXi’an 710049China Sanya Science and Education Innovation Park of Wuhan University of Technology Sanya 572000China Department of Chemical Engineering Faculty of EngineeringMahidol UniversityNakhon Pathom 73170Thailand School of Mathematical&Physical Sciences Wuhan Textile UniversityWuhan 430200China Joint Institute of Chemical Research(FFMiEN) Peoples Friendship University of Russia(RUDN University)6 Miklukho-Maklaya Str.117198 MoscowRussia National Research Tomsk Polytechnic University Lenin Avenue 30634050 TomskRussia Hubei Key Laboratory of Ferro &Piezo-electric Materials and DevicesFaculty of Physics and Electronic SciencesHubei UniversityWuhan 430062China School of Chemistry and Chemical Engineering Hainan UniversityHaikou 57022China

The bioinspired Fe-N-C features an asymmetric Fe-N_(5)configuration to produce active metal-oxygen intermediates by introducing axial N ligand into a symmetric Fe-N_(4) structure,enabling highly active oxygen reduction reaction(ORR).However,the artificial creation of active Fe-N_(5)configuration with a direct,facile and green method has been rarely developed yet,as current techniques involve complex processes and costly ***,we advance a novel solid-state stepwise temperature-programmable(SST)route to directly produce bioinspired Fe-N_(5)-*** then demonstrate that such a Fe-N_(5)-C exhibits a quite higher half-wave potential(0.92 V)with 22-fold faster ORR kinetics(15.6 mA·cm^(−2)@0.85 V)over that of the commercial Pt/C ***,we perform density functional theory(DFT)to find that the Fe is discharged with an extra 0.1 e^(−)through the axially coordinate N ligand,which significantly enhances the ability to activate O_(2) and enables an easier desorption of the crucial intermediate ^(*)OH on the Fe-N_(5)configuration over the conventional Fe-N_(4) structure.

关键词： single atom catalysts Fe-N_(5)coordination solvent-free synthesis oxygen reduction reaction(ORR) metal-air battery

来源：评论

学校读者我要写书评

暂无评论

Light tuning CO/H_(2)composition on Ag:Unraveling CO_(2)mass transfer and electron-phonon coupling in plasmon-enhanced electrocatalysis

引用

Nano Research 2025年第1期18卷 173-185页

作者： Rui Lin Dong Fan Luca MBerger Thomas Possmayer Yu Zhou Jiexin Zhu Xingbao Chen Wen Luo Lars Allmendinger Andreas Tittl Leonardo de Souza Menezes Guillaume Maurin Shihe Yang and Stefan AMaier Nanoinstitute Munich Faculty of PhysicsLudwig-Maximilians-Universität München80539 MunichGermany Institut Charles Gerhardt Montpellier UMR 5253 CNRS ENSCM UniversitéMontpellierPlace E.Bataillon34090 MontpellierFrance Guangdong Provincial Key Lab of Nano-Micro Material Research School of Advanced MaterialsPeking University Shenzhen Graduate SchoolShenzhen 518055China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Faculty of Chemistry and Pharmacy Ludwig-Maximilians-Universität München81377 MunichGermany Departamento de Física Universidade Federal de Pernambuco50670-901 Recife-PEBrazil School of Physics and Astronomy Monash University Clayton CampusMelbourneVictoria 3800Australia Department of Physics Imperial College LondonSW72AZ LondonUK

Plasmon-enhanced electrocatalysis(PEEC)is an emerging approach to mitigate CO_(2)*** mechanisms behind CO_(2)adsorption and reduction at the catalyst-electrolyte interface in PEEC still need to be further ***,we employ a well-defined Ag nanostructure to elucidate these pivotal *** shining light with wavelengths of 625,525,405 nm on Ag,an adjustable CO/H_(2)ratio from 35 to 1 can be *** reaction pathway changing under plasmonic excitation does not originate from the lowered CO_(2)mass transfer in the vicinity of Ag,as the electrochemical quartz crystal microbalance results unravel that a slightly elevated temperature in bulk electrolyte caused by light irradiation cannot weaken the CO_(2)adsorption at the Ag catalyst-electrolyte *** calculations reveal that optical excitation towards shorter wavelengths leads to a progressive lowered energy barrier for H_(2)formation together with an enhanced energy barrier for^(*)COOH *** thermodynamically suppressed,CO_(2)reduction can still be improved kinetically by optimizing the excitation wavelength and intensity,being accompanied with the enhanced *** absorption spectroscopy results further correlate the higher photocurrent with a prolonged electron-phonon coupling time,verifying that the improvement of CO_(2)reduction kinetics in PEEC can be realized by hot electron harnessing.

关键词： plasmonic catalysis photoelectrochemical CO_(2)reduction CO/H_(2)ratio hot electron generation electronphonon coupling thermal effect

来源：评论

学校读者我要写书评

暂无评论

Ab-initio insight into electrochemical characteristic of Zr2N monolayer as sodium ion battery by O and Se functional group strategy

引用

Journal of Molecular Liquids 2025年 429卷

作者： Yin, Jiangtao Li, Lingxia Zhang, Wenbo Gong, Shengli Ren, Junqiang Liu, Maocheng Lu, Xuefeng State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals School of Materials Science and Engineering Lanzhou University of Technology Lanzhou730050 China

As a novel type of two-dimensional electrode material, MXene with versatile surface functional groups can provide additional active sites, exhibiting high pseudo capacitance and large specific capacity. This article uses first principles to investigate the electrochemical properties of oxygen and halogen elements modified Zr2N as anode materials for sodium ion batteries. The results indicate that O and Se functionalized Zr2N material is more suitable as an anode material for sodium ion batteries compared to other functionalized materials. Zr2NT2 (Zr2NO2 and Zr2NSe2) have low diffusion barriers to facilitate the diffusion of sodium ions, with a theoretical capacity of 293.29 mAh/g and 151.29 mAh/g, respectively. The open circuit voltage is in the range of 0–1 V, which can prevent the formation of lithium dendrites and ensure the safe operation of the battery. These characteristics are attributed to the redistribution of surface charges for functionalized Zr2N, which results in uniform interaction forces between adsorbed atoms and the matrix, thereby improving the adsorption stability of sodium ions. In summary, this study reveals the energy storage performance mechanism of O and Se functionalized MXene electrode materials at the microscale, laying a solid foundation for subsequent experimental preparation. © 2025 Elsevier B.V.

关键词： Active material Electronic properties First-principles calculations MXene Sodium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Maximum Power Point Tracking Using a Multimode Hunter-Prey Optimization Algorithm for Gradually Varying Power in Centralized Thermoelectric Generation System

引用

Energy technology 2025年第0期

作者： Zhu, Wenchao Li, Peng Yang, Wenlong Xie, Changjun Li, Hao Yang, Yang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan430070 China School of Automation Wuhan University of Technology Wuhan430070 China Wuhan Industrial Technology Institute of Artificial Intelligence and New Energy Vehicles Wuhan430119 China Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of Technology Wuhan430070 China

The unstructured power outputs from thermoelectric generator (TEG) systems have precipitated the advancement of maximum power point tracking (MPPT) methods toward more intelligent solutions. This article concentrates on centralized TEG systems which work during nonuniform distribution of temperature cases and introduce the hunter-prey optimization algorithm with multimode updating (MMUHPO). Existing MPPT methods based on metaheuristic algorithms pay attention to improving tracking speed, efficiency, oscillation, and call frequency. However, in scenarios marked by gradual changes in power characteristics, the precision of MPPT algorithms can lead to frequent oscillatory searches and elevated computational demands. MMUHPO reduces power loss and simplifies algorithm complexity by improving the original mechanism and introducing termination mechanism and multimode update mechanism. Herein, the proposed algorithm is compared with several widely used MPPT algorithms based on metaheuristic algorithms under five different operating conditions. Remarkably, the MMUHPO algorithm demonstrates a substantial enhancement in energy collection efficiency, with the increase in efficiency reaching up to 109.8%. Finally, real-time data simulation experiments corroborate the exceptional tracking performance of the proposed algorithm. © 2025 Wiley-VCH GmbH.

关键词： Heuristic algorithms

来源：评论

学校读者我要写书评

暂无评论

Effect of Co Content on Microstructure and Mechanical Properties of High-Entropy High-Temperature Shape Memory Alloy

引用

稀有金属材料与工程 2025年第1期54卷 10-16页

作者： Zhao Yanchun Jin Bo Feng Yuanfei Ma Huwen Yu Zhiqi Feng Li Liaw Peter K State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of TechnologyLanzhou 730050China Wenzhou Pump and Valve Engineering Research Institute of Lanzhou University of Technology Wenzhou 325105China Department of Materials Science and Engineering University of TennesseeKnoxville TN37996USA

(TiZrHf)_(50)Ni_(30)Cu_(20-x)Co_(x)(x=2,4,6,at%)high-entropy high-temperature shape memory alloys were fabricated by watercooled copper crucible in a magnetic levitation vacuum melting furnace,and the effects of Co content on microstructure and mechanical properties were *** results indicate that the grain size of the alloy decreases with increasing the Co *** the as-cast state,the alloy consists primarily of the B19′phase,with a trace of B2 *** fracture morphology is predominantly composed of the B19′phase,whereas the B2 phase is nearly *** the Co content or reducing the sample dimensions(d)markedly enhance the compressive strength and ductility of the *** d=2 mm,the(TiZrHf)_(50)Ni_(30)Cu_(14)Co_(6) alloy demonstrates the optimal mechanical properties,achieving a compressive strength of 2142.39±1.8 MPa and a plasticity of 17.31±0.3%.The compressive cyclic test shows that with increasing the compressive strain,the residual strain of the(TiZrHf)_(50)Ni_(30)Cu_(14)Co_(6) alloy increases while the recovery ability *** superelastic recovery capability of the alloy is continuously *** superelastic recovery rate increases from 1.36%to 2.12%,the residual strain rate rises from 1.79%to 5.52%,the elastic recovery rate ascends from 3.86%to 7.36%,while the total recovery rate declines from 74.48%to 63.20%.

关键词： high-temperature shape memory alloy high-entropy alloy microstructure mechanical property

来源：评论

学校读者我要写书评

暂无评论

Introduction of the interfacial layer between filler and matrix: An effective approach towards developing high thermal conductive dielectric composite

引用

Ceramics International 2025年

作者： Shen, Jie Chen, Xian Qi, Yu He, Wenhao Li, Qiangzhi Zhang, Jiayi Zhou, Jing Chen, Wen Hubei Longzhong Laboratory Wuhan University of Technology Xiangyang Demonstration Zone Xiangyang441000 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China Sanya Science and Education Innovation Park Wuhan University of Technology Sanya572024 China

In the development of high-performance electronic devices, high thermal conductive dielectric composites are crucial. For PTFE-based dielectric composites, enhancing thermal conductivity while maintaining low dielectric properties remains a challenge. The key issue lies in the high interfacial thermal resistance between fillers and the PTFE matrix, which restricts the improvement of thermal conductivity. This paper focuses on introducing an interfacial layer between the filler and the matrix as an effective approach. By constructing a SiO2 interfacial layer between hBN and PTFE, we formed hBN@SiO2 core-shell structured fillers and then prepared hBN@SiO2/PTFE composites. This method significantly reduces the interfacial thermal resistance. Consequently, the thermal conductivity of the composite reaches 1.40 W/(m·K), the coefficient of thermal expansion decreases, and it still keeps a low dielectric constant of 3.9 and low dielectric loss of 1 × 10−4. This study provides an innovative and effective way for the development of high thermal conductive dielectric composites, which is of great significance for high-power and high-frequency applications. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Dielectric losses

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：